Renzo Mischianti
ITALY • + Follow
Components
|
|
SMA Antenna adapter |
x 1 |
Description
EByte LoRa E22 E32 SMD adapter
LoRa or Long Range wireless data telemetry is a technology pioneered by Semtech that operates at a lower frequency than NRF24L01 (433 MHz, 868 MHz or 916 MHz agains 2.4 GHz for the NRF24L01) but at thrice the distance (from 4000m to 10000m).upport Forum
I create a library to manage EBYTE E22 based on Semtech SX1268 series of LoRa device, very powerfull, simple and cheap device.
I create some shield for Arduino and WeMos D1 mini (esp8266), look at my other project.
Code
https://github.com/xreef/EByte_LoRa_E22_Series_Library
Schematic and Layout
https://www.mischianti.org/?s=EByte
Sep 22,2020
4,582 views
EByte LoRa E22 E32 SMD adapter
This LoRa device is fantastic, but expecially E22 is difficult to find in module format, so I create a simple adapter for SMD
4582
2
2
Published: Sep 22,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
- Comments(2)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Renzo Mischianti
-
WeMos D1 (esp8266) Ebyte LoRa shield (10Km) with HardwareSerial and 5V switch
HardwareSerial shield 5v versionAfter a while, I understand that to have a good range, I need to pow...
-
WeMos D1 (esp8266) Ebyte LoRa shield (10Km) with HardwareSerial and voltage regulator
The new shield is similar but has more features here than the breadboard schema, even if it is limit...
-
Inverter Aurora ABB (Power One) Web Monitor (WIM): server PCB
If you have trouble with the price check the Min Track/Spacing, It must be greater or equal than 6/6...
-
Arduino NANO 33 IoT SPI Flash memory shield
Like the Arduino MKR WiFi 1010, the NANO 33 IoT doesn’t have Flash memory to store data. I wrote an ...
-
STM32F4 black pill EByte LoRa E32 E22 E220 shield v1.0
Detailed information on my siteFor LoRa E32, LoRa E22 and LoRa E220I start using STM32 microcontroll...
-
STM32F4 Black-pill: WiFi shield (WiFiNINA)
STM32F1 Blue-pill: WiFi shield (WiFiNINA)Complete tutorial here.First of all, read the article “STM3...
-
STM32F1 Blue-pill: WiFi shield (WiFiNINA)
First of all, read the article “STM32: use WiFiNINA with ESP32 WiFi Co-Processor”, where there are a...
-
STM32F1 blue pill EByte LoRa E32 E22 E220 shield v1.0
Full documentation of the PCBEByte E32 tutorialEByte E22 tutorialEByte E220 tutorialI start using ST...
-
LoRa remote water level and pump controller: Battery powered client (ReWaL)
ArticlesLoRa remote water tank level and pump controller: introLoRa remote water level and pump cont...
-
LoRa remote water level and pump controller: Server
ArticlesLoRa remote water tank level and pump controller: introLoRa remote water level and pump cont...
-
ESP32 WeMos LOLIN32 EByte LoRa E32, E22 and E220 shield (10Km)
Full articleFinally, I’m going to publish my LoRa shield for WeMos LOLIN32. This is one of my prefer...
-
Arduino MKR WiFi 1010 SPI Flash memory shield
Arduino SAMD (NANO 33 and MKR): SPI flash memory FAT FSI have a couple of Arduino MKR WiFi 1010, and...
-
WeMos D1 (esp8266) relay shield
WeMos D1 3v module relay shield at work main.One of my project’s most used components is undoubtedly...
-
WeMos D1 (esp8266) with pcf8574 multiplexer to manage encoder, buttons or other
For fast prototyping, I will create a set of shields for the WeMos D1 mini; the first is a service b...
-
MKS WiFi module
This is a simple PCB to create a WiFi module for 3D printer that use MKS Robin Nano v1 mainboard.I t...
-
Ciclop 3D scanner board v1.2
ElectronicI create a board with PTC Resettable Fuse, (1.85A 30V) this simple component protect your ...
-
esp32-wroom-32 esp32-S programming board
Full article and specs on my site www.mischianti.orgESP32-wroom-32, esp32-S: flash, pinout, specs an...
-
esp-12 esp-07 (esp8266) programming board
You can find detailed information on my site When I went to use esp12 and esp07, and the first probl...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
90 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
176 1 1
