Mathias Pez
UNITED STATES OF AMERICA • + Follow
Components
|
|
ESP8285 |
x 1 | |
|
|
26MHz Oscillator |
x 1 |
Description
ESP8285 WiFi Module
Similar to the ESP-12 WIFI module this design is intended for low-power operation and reduced size application.
It is design around the Expressif ESP8285 which embedded a 1MB Flash and a ESP8266 core. The board allow access to all the GPIO of the chip and provide a PCB antenna to reduce external component.
The board is compatible with the Expressif SDK and Toolchain. it can run Micropython, nodeLUA/nodemcu and is compatible with Arduino IDE.
Aug 12,2020
4,663 views
end-flag
ESP8285 WiFi Module
2 Layers PCB 22 x 15.2 mm FR-4, 0.8 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
A simple, small low power WIFI module with onboard PCB antenna. Based on the ESP8266 Expressif family. The chip used is the ESP8285.
4663
8
12
10.00 (1)
Published: Aug 12,2020
Download Gerber file 153
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(12)
- Likes(8)
VOTING
1 votes
- 1 USER VOTES
10.00
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Mathias Pez
You may also like
-
-
-
Modifying a Hotplate to a Reflow Solder Station
840 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
441 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1080 4 2 -
How to measure weight with Load Cell and HX711
687 0 3
Yes I can share the schematic, it is pretty basic. the min. required components around the ESP8285. The antenna filter is not even needed. Please provide a mean to exchange the schematics.
You can share it on my website: https://solarpi.me/upload.html Thaks!
Done
HI Mathias. Could you provide the schematic? my mail - iottrade2017@gmail.com Thaks!
Hi, I'm also interested in the schematic, can you please provide it? My e-mail is bcantu@ensambles.net
The ESP8285 has the bootloader pre-flashed. My other project is a programmer/breadboard for this module. I've validated it by loading both Micropython and modemcu cores.