Krzysztof Swoboda
POLAND • + Follow
Description
GPRS Webasto driver on BLYNK based API & RS485 MODBUS RTU GPRS Transmitter
The device was created as an alternative to the factory TELESTART for WEBASTO. It is cheaper and reliable because it uses SIM800 or GPRS transmission. It always works wherever there is cellular coverage. You can write the software like me on the Arduino NANO using the free BLYNK application or any other.
The second function of the device is the MODBUS RTU transmitter also on Android using Blynk. That was the idea - you can do what you want with the project
ENJOY !!
Nov 06,2019
2,185 views
GPRS Webasto driver on BLYNK based API & RS485 MODBUS RTU GPRS Transmitter
2 Layers PCB 70 x 70 mm FR-4, 1.6 mm, 1, HASL with lead, Red Solder Mask, White silkscreen
A simple and effective WEBASTO controller for parking heating and a GPRS transmitter working in the MODBUS RTU standard
2185
3
2
Published: Nov 06,2019
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial (CC BY-NC)
License.
- Comments(2)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Krzysztof Swoboda
-
Liquid Level Controller
Simple device, no CPU - only simple logic. If the water level exceeds the first level, the main pump...
-
GPRS Webasto driver on BLYNK based API & RS485 MODBUS RTU GPRS Transmitter
The device was created as an alternative to the factory TELESTART for WEBASTO. It is cheaper and rel...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1
