I present to you my edited project for Greaseweazle F1. Greaseweazle can read and write PC, Amiga, Atari ST floppy disk images from your PC computer and plug into the USB port. My project uses the standard PC Floppy driver. The stock Amiga floppy cable will also be used as a USB type B (PC printer cable). When the USB connection is made, the Power led on the PCB lights up, and the activity led flashes during reading and writing. You can mount the power and activity leds on the pcb or by extending them to the front of the case.

The Greaseweazle project requires installing the F1 firmware on the bluepill and running the PC host tools. These softwares should be downloaded from the site of Mr. Keir Fraser who made the Greaseweazle project. For GUI, I recommend FluxMyFluffyFloppy. You can also use the Greaseweazle WinUAE emulator as a floppy drive, robsmith's FloppyBridge Plugin is required to do this.

https://www.youtube.com/watch?v=HsCgANHVQpI