Description
Hybrid Tone Controll
The circuit uses 2N2222 transistor for the bass setting, and 2N5551 transistor for the treble setting, and use op-amp DIP-8 (I use AD823) as the final amplification.
The circuit is made as simple as possible with standart through hole Components that easy found on the store.
This tone control is low distortion, clarity sound, good separation, good bass attack.
The circuit Tested with simetrical supply, the maximum rating is 12v-0-12v transformer.
Don't use more than 2A transformer.
Schematic and Layout
https://youtu.be/V3TnH_8WcvM
Jun 02,2020
2,750 views
end-flag
Hybrid Tone Controll
The circuit uses 2N2222 transistor for the bass setting, and 2N5551 transistor for the treble setting, and use op-amp DIP-8 (I use AD823) as
2750
7
0
2.00 (1)
Published: Jun 02,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(0)
- Likes(7)
Log in to post comments.
Upload photo
0 / 10000
VOTING
1 votes
- 1 USER VOTES
2.00
- YOUR VOTE 0.00 0.00
-
1design
-
2usability
-
2creativity
-
3content
2.00
More by barita
-
DIY STEREO RCA TO BALANCE XLR CONVERTER
Stereo KONVERTER from Unbalance signal to Balance signal for many purposes of audio.The unbalance in...
-
Stereo TPA3116D2 Amplifier
Stereo amp using TPA3116D2 chip in dual pbtl which has a great power output about 2x100 watts Max.Th...
-
STEREO LM4766 AMPLIFIER
Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
-
STEREO AMPLIFIER TPA3255 CLASS D
Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
-
Digital active cross over 2.1
This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
-
Stereo TDA7266 Mini Amplifier
This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
-
Simple audio limiter
This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
-
TIP 41/42 Mini Amplifier SMD
The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
-
LM3875 Amplifier
This module is a mono board, so you can make 2 board for stereo or 6 board for 5.1, very recommend t...
-
GOLD-FI Preamp
This circuit use a dual op-amp chip for one channel, it works on parallel mode. So it need two op-am...
-
DIY 5.1 Amplifier TPA3116D2
In this project I make a 5.1 amplifier using the TPA3116D2 chip.This amplifier can produce high powe...
-
Subwoofer amplifier STK4044V
This subwoofer amplifier using the STK4044V chip, because this chip very low distortion with THD 0.0...
-
DIY Third Order Lowpass Filter PT2351
This lowpass filter PT2351 run in third order with -18dB /oct slope, it means that the resulting sig...
-
STK426-530 STEREO AMPLIFIER
In this project I want to make an amplifier using the STK426-530 chip that which is often used in hi...
-
KIA6210AH STEREO AMPLIFIER
In this project I want to make a stereo amplifier using the KIA6210ah chip.This chip is capable of p...
-
Class A amplifier IRF610
Very simple class a amplifier with the basic mosfet amp scheme found from google and I modified it u...
-
DIY LM383T Stereo Amplifiier
This chip is very rare on the market. Based on datasheet, this chip capable of producing 7Watt/chann...
-
Stereo TDA1554Q Amplifier
This chip is capable of producing 2x22Watt power to drive 4-6 inch speakers.Surprisingly, this TDA15...
-
DIY STEREO RCA TO BALANCE XLR CONVERTER
Stereo KONVERTER from Unbalance signal to Balance signal for many purposes of audio.The unbalance in...
-
Stereo TPA3116D2 Amplifier
Stereo amp using TPA3116D2 chip in dual pbtl which has a great power output about 2x100 watts Max.Th...
-
STEREO LM4766 AMPLIFIER
Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
-
STEREO AMPLIFIER TPA3255 CLASS D
Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
-
Digital active cross over 2.1
This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
-
Stereo TDA7266 Mini Amplifier
This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
-
Simple audio limiter
This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
-
TIP 41/42 Mini Amplifier SMD
The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
-
LM3875 Amplifier
This module is a mono board, so you can make 2 board for stereo or 6 board for 5.1, very recommend t...
-
GOLD-FI Preamp
This circuit use a dual op-amp chip for one channel, it works on parallel mode. So it need two op-am...
-
DIY 5.1 Amplifier TPA3116D2
In this project I make a 5.1 amplifier using the TPA3116D2 chip.This amplifier can produce high powe...
-
Subwoofer amplifier STK4044V
This subwoofer amplifier using the STK4044V chip, because this chip very low distortion with THD 0.0...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
181 1 3 -
Easy to print simple stacking organizer with drawers
89 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1155 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
647 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1467 4 3
