LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some cases it is not very convenient to use - for changing some parameters in the program it always requires direct cable connection with your PC. For example: If you have an Arduino controlling or monitoring system placed distantly from your house and you want to update the software, to upload the new sketch you have to go there where the Arduino board is suited, connect it throw USB cable to your PC and update the software. The distance to your Arduino system can be kilometers... and it can be placed in the mountings, in the forest and etc. This project solves the mentioned problem. You can upload your sketch in the Arduino board without leaving you home or office. As additional gain for free you receive also the possibility to monitor your sensor data or send commands to your board using the serial monitor or plotter.
The new proposed board is based on the Arduino Uno revision 3, in which the USB to serial converter chip is replaced by UART LORA module. To make the whole system work you need also an USB to serial to LORA converter.
LORADUINO USB to LORA converter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
- Dmytro Skybin Apr 02,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by penev_milen
- LORADUINO USB to LORA converter The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
- LORADUINO Main board The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
- Arduino Mega Rev.3 with CH340G Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
- Phone call detector All needed information about the device can be found in the Instructables site : https://www.instruc...
- White noise generator This board can be used for white noise generation. Its principle of work is based on the noise gener...
- Joule Thief Power Bank All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
- Arduino nano to uno adaptor board Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
- Shield_DMM This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
- FM Radio All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
128 0 0 -
DIY Laser Power Meter with Arduino
190 0 2 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
171 0 2 -