penev_milen
SWITZERLAND • + Follow
Top Solder Mask
Top Paste Mask
Top Overlay
Top Copper Layer
Mill Layer
Bottom Solder Mask
Bottom Paste Mask
Bottom Overlay
Bottom Copper Layer
NC Drill
Bottom
Description
FM Radio
Schematic and Layout
https://www.tindie.com/products/Chichomecho/tiny-fm-radio/?pt=ac_prod_search
Dec 14,2017
2,300 views
FM Radio
2 Layers PCB 30 x 50 mm FR-4, 1.6 mm, 1, HASL with lead, Yellow Solder Mask, White silkscreen
2300
0
0
Published: Dec 14,2017
Download Gerber file 31
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by penev_milen
-
LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
LORADUINO Main board
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
-
Phone call detector
All needed information about the device can be found in the Instructables site : https://www.instruc...
-
White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise gener...
-
Joule Thief Power Bank
All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
-
Arduino nano to uno adaptor board
Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
-
Shield_DMM
This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
-
FM Radio
All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
