penev_milen
SWITZERLAND • + Follow
Description
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Mega to use it as USB to serial converter chip. I changed also the USB B type connector to Micro USB - now it is more common and standard. Assembling this board requires soldering and programming experience. All needed information how to burn the bootloader inside theAtmega2560 / Atmega1280 chip, you can find in the Arduino site.
Schematic and Layout
The circuit
Arduino_MEGA_2560-Rev3.pdf
Apr 11,2022
2,016 views
Arduino Mega Rev.3 with CH340G
Modified Arduino Mega design to use CH340G and micro USB connector.
2016
1
0
Published: Apr 11,2022
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by penev_milen
-
LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
LORADUINO Main board
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
-
Phone call detector
All needed information about the device can be found in the Instructables site : https://www.instruc...
-
White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise gener...
-
Joule Thief Power Bank
All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
-
Arduino nano to uno adaptor board
Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
-
Shield_DMM
This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
-
FM Radio
All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
125 0 0 -
DIY Laser Power Meter with Arduino
182 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
165 0 2
