DigitalArtisans.org
JAPAN • + Follow
Description
Mimas FGPA Tektronix TLA Breakout Board
This is a board to bring out all pins of the Mimas FPGA to headers used by Tektronix TLA probes. It serves the purpose of measuring timing of the Spartan 6 on the Mimas FPGA board. The low cost Mimas board can be found https://numato.com/product/mimas-spartan-6-fpga-development-board
Nov 07,2019
1,089 views
Mimas FGPA Tektronix TLA Breakout Board
2 Layers PCB 61 x 63 mm FR-4, 1.6 mm, 1, HASL with lead, White Solder Mask, Black silkscreen
This is a board to bring out all pins of the Mimas FPGA to headers used by Tektronix TLA probes.
1089
0
0
Published: Nov 07,2019
Download Gerber file 3
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by DigitalArtisans.org
-
4[4]x4[4] Analog Mux
This board is designed for routing is 2 sets of 4 to 1 audio (i2s) lines (bck, fs, rd, wd) for test ...
-
IDE Breakout board
A simple pass-through snooping board for snooping a full sized IDE disk. Lines are brought to 2.54mm...
-
Single Channel Audio Meter
Single Channel Audio Meter
-
1.27mm Breakout Board
Allows for interfacing to 1.27 mm components on a 2.54 mm breadboard and vice versa. Header pins can...
-
Mimas FGPA Tektronix TLA Breakout Board
This is a board to bring out all pins of the Mimas FPGA to headers used by Tektronix TLA probes. It ...
-
DS1245YP Replacement Board v2
A solder-in replacement for the DS1245YP to eliminate battery replacement problems.BOM and instructi...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
