MyStat Potentiostat
Please refer to this article for more details on the project https://www.sciencedirect.com/science/article/pii/S2468067220300729. This is an opensource potentiostat released under the GNU General Public License v.3.
Note you will need a 15V power supply like this one (https://www.amazon.es/dp/B00N2PQA1S?psc=1&ref=ppx_yo2ov_dt_b_product_details)
also this cable to get access to the electrodes (https://www.digikey.es/en/products/detail/tensility-international-corp/10-00331/2350237). You can then add gator clips or similar to the cable terminals to get proper access to the electrode connections.
MyStat Potentiostat
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
Log in to post comments.
More by Engineer
-
-
-
Modifying a Hotplate to a Reflow Solder Station
781 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
413 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
995 4 2 -
How to measure weight with Load Cell and HX711
647 0 3
