Konstantin KnivD
UNITED KINGDOM • + Follow
Components
|
|
10u |
x 8 | |
|
|
1u |
x 4 | |
|
|
PPTC362LFBN-RC |
x 4 | |
|
|
200k |
x 3 | |
|
|
470R |
x 1 | |
|
|
4609X-101-471LF |
x 7 | |
|
|
GTL2000DGG |
x 3 | |
|
|
MCP1700-3302E/TO |
x 1 | |
|
|
SSW-140-01-T-D |
x 3 |
Description
RC2014 Expander for Z20X Computer
The Expander is a 2-layer 181 x 108mm optional board that serves a dual role in the Z20X system. It plugs on to the expansion header, and provides the system with three extra slots for additional modules in the Z20X’s native module format with 72 pins and 3.3V logic.
In addition to that, it also offers three more slots for RC2014-compatible modules with 80 pins and 5V logic. If support for the RC2014 bus is not needed, all components on the board can be reduced to only J1-J4 and C1-C4 installed.
Schematic and Layout
https://z20x.computer
Mar 06,2020
1,699 views
RC2014 Expander for Z20X Computer
Universal board for the Z20X computer with 3x 3.3V logic Z20X expansion slots and 3x 5V RC2014 expansion slots
1699
0
0
Published: Mar 06,2020
Download Gerber file 8
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Konstantin KnivD
-
System K8 Computer
System K8 is a simple FPGA-powered computer with large memory and modern connectivity.It is designed...
-
Z380 module for Z20X
Another experimental CPU upgrade module for Z20X with the ZiLOG’s Z8L382 processor which is built ar...
-
ZNEO CPU board for Z20X Computer
This is an experimental CPU upgrade module for Z20X with the ZiLOG’s 16-bit ZNEO processor. More inf...
-
eZ80F91 CPU board for Z20X Computer
This CPU upgrade module uses the bigger version of the default ‘F92 processor. The eZ80F91 chip has ...
-
eZ80F92 CPU board for Z20X Computer
It is a small 38.6 x 38.6mm (approximately 1.5” x 1.5”) 2-layer PCB that holds the eZ80F92 IC only, ...
-
Mini Expander for Z20X Computer
The Mini Expander is a small 2-layer board 71 x 108mm. It lacks all 5V logic and RC2014 bus supporti...
-
RC2014 Expander for Z20X Computer
The Expander is a 2-layer 181 x 108mm optional board that serves a dual role in the Z20X system. It ...
-
The Z20X Computer
Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. I chose eZ80...
-
RITTLE Board
The RITTLE Board is a very simple, almost bare bone PIC32 development board. It is built around the ...
You may also like
-
-
-
DIY Transistor Tester | Build Your Own LCR Meter at Home with Arduino Nano
14 0 0 -
-
ESP32-S3 breakout board for motorizing Iron Man helmets
108 0 2 -
-
-
