|
|
PIC32MZ2048EFH064-250I/PT |
x 1 | |
|
|
DSC1033BE2-024.0000 |
x 1 | |
|
|
MCP1826S-3302E/DB |
x 1 | |
|
|
SG-3030JF32.768K |
x 1 | |
|
|
FSMSM |
x 1 | |
|
|
MMUN2233 |
x 1 | |
|
|
MH2029-600Y |
x 2 | |
|
|
104031-0811 |
x 1 | |
|
|
XM7D-0512 |
x 1 | |
|
|
SLW-108-01-L-D |
x 2 | |
|
|
TSW-105-08-G-S-RA |
x 1 | |
|
|
TSW-126-22-G-S |
x 2 | |
|
|
PMEG3050EP |
x 1 | |
|
|
100n (0805) |
x 10 | |
|
|
47u (1206) |
x 1 | |
|
|
2u2 (0805) |
x 3 | |
|
|
10k (0805) |
x 10 | |
|
|
1M (0805) |
x 2 | |
|
|
470R (0805) |
x 1 | |
|
|
27R (0805) |
x 3 |
RITTLE Board
The RITTLE Board is a very simple, almost bare bone PIC32 development board. It is built around the 64-pin PIC32MZ-EF package and has all I/O lines exposed and available for access from outside. It can be used on breadboards or as part of a multi-board stack.
The board includes a micro-SD slot and an extended backward-compatible version of a MikroBUS connector. It can be powered through the mini-USB connector, or through pins from an external power supply.
The RITTLE Board was originally designed for the development of the Rittle operating environment. For more details please visit http://rittle.org
It is however a fully independent universal piece that can be used in all sort of projects around the PIC32MZ microcontroller.
RITTLE Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Konstantin KnivD
-
System K8 Computer
System K8 is a simple FPGA-powered computer with large memory and modern connectivity.It is designed...
-
Z380 module for Z20X
Another experimental CPU upgrade module for Z20X with the ZiLOG’s Z8L382 processor which is built ar...
-
ZNEO CPU board for Z20X Computer
This is an experimental CPU upgrade module for Z20X with the ZiLOG’s 16-bit ZNEO processor. More inf...
-
eZ80F91 CPU board for Z20X Computer
This CPU upgrade module uses the bigger version of the default ‘F92 processor. The eZ80F91 chip has ...
-
eZ80F92 CPU board for Z20X Computer
It is a small 38.6 x 38.6mm (approximately 1.5” x 1.5”) 2-layer PCB that holds the eZ80F92 IC only, ...
-
Mini Expander for Z20X Computer
The Mini Expander is a small 2-layer board 71 x 108mm. It lacks all 5V logic and RC2014 bus supporti...
-
RC2014 Expander for Z20X Computer
The Expander is a 2-layer 181 x 108mm optional board that serves a dual role in the Z20X system. It ...
-
The Z20X Computer
Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. I chose eZ80...
-
RITTLE Board
The RITTLE Board is a very simple, almost bare bone PIC32 development board. It is built around the ...
-
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
146 0 0 -
