Description
Robot Launcher
This project was about about making a robot duck launcher that would be attached to a robot. The purpose of this was to attach to this onto the robot and making the launcher launch the ducks into certain area.
Dec 09,2024
147 views
end-flag
Robot Launcher
I had to build a robot launcher for a robot competition.
147
0
3
Published: Dec 09,2024
PCBWay Donate 10% cost To Author
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(3)
- Likes(0)
More by Engineer
You may also like
-
-
-
Modifying a Hotplate to a Reflow Solder Station
848 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
444 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1086 4 2 -
How to measure weight with Load Cell and HX711
689 0 3
https://cad.onshape.com/documents/7a10cb99b17c17fe71b5deb2/w/5a3e667788a2f9c1e6c31896/e/302ae3e5d5a02741b58a45d8?renderMode=0&uiState=67565caf5bfcfa1ee8b83a65 - here you go!
Thank you for your link. Could you please upload the corresponding file to the location shown below on the sharing page?