IMSAIGUY
UNITED STATES OF AMERICA • + Follow
Edit Project
Description
Small LED Ring Light for robotics camera or microscope
This light is good for a robotics camera that needs illumination or I used it here for dark field illumination:
Aug 23,2021
1,125 views
end-flag
Small LED Ring Light for robotics camera or microscope
Tiny ring light. I used it for macro photography.
1125
0
0
Published: Aug 23,2021
Download Gerber file 25
BOM(Bill of materials)
Centroid file
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/02/29 (GMT+8)
File update record
2024-02-2910:40:49
Centroid file is updated.
2024-02-2910:40:49
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Log in to post comments.
Upload photo
0 / 10000
It looks like you have not written anything. Please add a comment and try again.
You can upload up to 5 images!
Image size should not exceed 2MB!
File format not supported!
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by IMSAIGUY
- Chua's Circuit YouTube video will followhttps://en.wikipedia.org/wiki/Chua%27s_circuitAnalyzing the circuit using K...
- MGA-82563 6GHz Amplifier YouTube video will followDesigned for 50ohm impedance, 0.8mm thickness board requiredBoard tested to...
- SiTime Clock Oscillators I made these boards 0.8mm thick. Do not load R5 and R6.
- LM399 10.000V Voltage Standard Here are the youtube videos
- Lorenz Attractor From Paul Horowitz, the Lorenz attractor for oscilloscope XY display. YouTube video will follow late...
- Zener Diode Tester Jumper settings for 5, 10, 15, and 20mA currents
- Op-amp Test Board This is a two section board. two dual op-amps can be compared. Half of the device is used in a non-i...
- ATTINY ETC board for ETW-3800 Microprocessor Trainer this board fits the Heathkit ETW-3800 trainer. it has I2C breakout chips to allow lots of IO to conn...
- Narrow SO-20 to DIP Adapter this results in a 0.300" DIP for protoboardsit also includes a spot for a bypass capacitor to be use...
- Narrow SO-16 to DIP Adapter the DIP has a 0.300" size for protoboard maximization
- Tiny IMSAI 8080 Computer This uses an ATTINY814 microcontroller and a bunch of 74595 shift registers to flash the LEDs and re...
- Narrow SO-14 SMD to DIP Adapter I made this for using Attiny414 814 type devices on a protoboard with only 0.3" of width
- Digital Capacitor Bandpass Filter uses PE64012 serial programmable digital capacitorhttps://youtu.be/zgKv5fhoEHI
- Mini-Circuits MAR MMIC Amplifier When ordering board, choose 0.8mm thickness. This is correct thickness for 50ohm transmission line.R...
- Weinschel Programmable Attenuator YouTube video series describes project
- Electrical Symbol Drafting Stencil I wanted a drafting template for use with a Micron 08 pen. I had this made with 2.5mm thick clear ac...
- MiniCircuits GVA-63+ 6GHz Amplifier This amp is part of a YouTube series from start to finish, It is 10 parts. Here are parts 1 and 10
- SMD to SIP adapter boards Note: these are REV B boards that fix any problems shown in the YouTube video.Note: when you order t...
- Chua's Circuit YouTube video will followhttps://en.wikipedia.org/wiki/Chua%27s_circuitAnalyzing the circuit using K...
- MGA-82563 6GHz Amplifier YouTube video will followDesigned for 50ohm impedance, 0.8mm thickness board requiredBoard tested to...
- SiTime Clock Oscillators I made these boards 0.8mm thick. Do not load R5 and R6.
- LM399 10.000V Voltage Standard Here are the youtube videos
- Lorenz Attractor From Paul Horowitz, the Lorenz attractor for oscilloscope XY display. YouTube video will follow late...
- Zener Diode Tester Jumper settings for 5, 10, 15, and 20mA currents
- Op-amp Test Board This is a two section board. two dual op-amps can be compared. Half of the device is used in a non-i...
- ATTINY ETC board for ETW-3800 Microprocessor Trainer this board fits the Heathkit ETW-3800 trainer. it has I2C breakout chips to allow lots of IO to conn...
- Narrow SO-20 to DIP Adapter this results in a 0.300" DIP for protoboardsit also includes a spot for a bypass capacitor to be use...
- Narrow SO-16 to DIP Adapter the DIP has a 0.300" size for protoboard maximization
- Tiny IMSAI 8080 Computer This uses an ATTINY814 microcontroller and a bunch of 74595 shift registers to flash the LEDs and re...
- Narrow SO-14 SMD to DIP Adapter I made this for using Attiny414 814 type devices on a protoboard with only 0.3" of width
You may also like