Snes Flash cart by RetroCircuits
Snes reproduction pcb that is flashable with a flash programmer device that RetroCircuits also makes. The roms can be programmed and hand mounted as well so a programmer isn't necessarily needed. We will put the programmer device on this share site in the future.
The part microchip 10F322 is the CIC chip and must be programmed. PCBway might offer a programming service, but with a little effort, you can make a programmer device called the PICKIT4 from microchip. The hex code is included in the Gerber files. You can contact me for questions at Retrocircuits@gmail.com
https://youtu.be/sBp_pglnG_Q?si=KZl2uoNz6BGwRp4v
Snes Flash cart by RetroCircuits
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by markfrizb3
-
Snes 1A3B mapper adapter
If you like modding Snes cartridges, then this may help you. The cartridge designator "1A3B" is the ...
-
Snes Flash cart by RetroCircuits
Snes reproduction pcb that is flashable with a flash programmer device that RetroCircuits also makes...
-
Snes Flash Cart USB PROGRAMMER device
This pcb is a DIY that has everything you need to build your own SNES flash cart programmer. This is...
-
W08640ASY532_Snes 1L5B-20
This is a reproduction of the SA-1 SNES cartridge pcb 1L5B-20 that uses the 27c322 eprom.PCB is 102....
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
128 0 0 -
DIY Laser Power Meter with Arduino
190 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
171 0 2
