Stereo audio processor 12V
This is my DIY project try make audio processor that can work with single supply 12Volt DC and you can use it for any of your audio system that have 12V psu in it. If you need to use for car, you may need L-C filter to minimize the engine noise.
Audio processor using to controll sound from the input signal to the main amplifier. You can boost or cut some frequency according to your need easily. It is like tone control function but with more complicated adjustment.
This audio processor has some feature like : Bottom level, Phase controll, Body level, and Edge level.
I design this audio processor based on transistor 2N5551 and it use standart parts that you can find easily on the market.
what does it sounds like? and how to adjust ?
please check the video on barlex respectaizer youtube channel
Stereo audio processor 12V
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(3)
- Engineer Jul 20,2024
- Hasan Qazi Zahid Jun 19,2023
- Engineer Feb 28,2021
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
10design
-
10usability
-
10creativity
-
10content
-
2design
-
3usability
-
4creativity
-
1content
More by barita
- Simple audio limiter This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
- TIP 41/42 Mini Amplifier SMD The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
- LM3875 Amplifier This module is a mono board, so you can make 2 board for stereo or 6 board for 5.1, very recommend t...
- GOLD-FI Preamp This circuit use a dual op-amp chip for one channel, it works on parallel mode. So it need two op-am...
- DIY 5.1 Amplifier TPA3116D2 In this project I make a 5.1 amplifier using the TPA3116D2 chip.This amplifier can produce high powe...
- Subwoofer amplifier STK4044V This subwoofer amplifier using the STK4044V chip, because this chip very low distortion with THD 0.0...
- DIY Third Order Lowpass Filter PT2351 This lowpass filter PT2351 run in third order with -18dB /oct slope, it means that the resulting sig...
- STK426-530 STEREO AMPLIFIER In this project I want to make an amplifier using the STK426-530 chip that which is often used in hi...
- KIA6210AH STEREO AMPLIFIER In this project I want to make a stereo amplifier using the KIA6210ah chip.This chip is capable of p...
- Class A amplifier IRF610 Very simple class a amplifier with the basic mosfet amp scheme found from google and I modified it u...
- DIY LM383T Stereo Amplifiier This chip is very rare on the market. Based on datasheet, this chip capable of producing 7Watt/chann...
- Stereo TDA1554Q Amplifier This chip is capable of producing 2x22Watt power to drive 4-6 inch speakers.Surprisingly, this TDA15...
- DIY STEREO RCA TO BALANCE XLR CONVERTER Stereo KONVERTER from Unbalance signal to Balance signal for many purposes of audio.The unbalance in...
- Stereo TPA3116D2 Amplifier Stereo amp using TPA3116D2 chip in dual pbtl which has a great power output about 2x100 watts Max.Th...
- STEREO LM4766 AMPLIFIER Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
- STEREO AMPLIFIER TPA3255 CLASS D Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
- Digital active cross over 2.1 This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
- Stereo TDA7266 Mini Amplifier This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-