Surf pi metal detector
DESCRIPTION
Pulse Induction Metal Detector Surf PI classic version. (Note- It is not the longboard version but i have corrected the silkscreen of resistors so you can follow the build instructions of a longboard one without any issues). The dimension of this pcb is 210*44mm.
TECHNICAL DETAILS / COMPONENTS
- It works based on pulse induction technology
- It has gain, sample, delay variable
- Works with a variety of coils which are easy to build.
- no SMD components, DIP only making it easier to solder on their own for beginners
- some of the only metal detectors circuit which can be build using a multimeter without possesing an oscilloscope making it ideal for diy enthusiasts and the result being a cheap and reasonably accurate detector.
Build details on: http://www.adrianandgenese.com/blogger/2012/07/13/how-to-build-a-surf-pi-1-2-pulse-induction-metal-detector-from-a-diy-kit/ ( It is not my website and the all the rights to this website belong to the respective owner)
I decided to make it for my science project and wanted to share the pcb with the community since people usually find it difficult to get the gerber files for it. You can get the components list from the bom and all the components are easily available but if you cant find any of them you can ask me about any subsitute components and i will try my best to help the community!
Surf pi metal detector
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(16)
- Likes(10)
- 10 USER VOTES
- YOUR VOTE 0.00 0.00
-
2design
-
2usability
-
3creativity
-
4content
-
8design
-
8usability
-
8creativity
-
8content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
8design
-
8usability
-
8creativity
-
8content
-
1design
-
1usability
-
1creativity
-
1content
-
5design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
1usability
-
1creativity
-
1content
-
10design
-
10usability
-
10creativity
-
10content
More by Kaushal
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1007 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
544 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1277 4 2 -
How to measure weight with Load Cell and HX711
765 0 3
Problem solved, I changed the NE5534 seeing as it wasnt reacting to changing the value of the offset trimmer. Seems like I got a bad ic from my supplier. I gave you 10's for review as this was a fairly easy build and wouldnt have been possible for me without your pcb, thanks, regards peter
Where are you stuck? It's been long since I have looked at this but will help if I can
yes i will try buddy, proceed with your doubt
How could we talk in private? I would have a few questions and it is really important to find out the answer. You seem the person that would know the answers. If you want to talk, I would really appreciate it . Do you have a facebook account, whatsapp or I could just leave my phone number here?
no dont post your private phone number here it can be misused i know very little but if i can help heres my instagram account link https://www.instagram.com/kaushal_airsoft/?next=%2F#
Good afternoon! Sadly, I don't have an Instagram account so I created one in order to write to you.
Thanks!
thanks man
Thanks buddy!