Alvaro Gomez
SPAIN • + Follow
Components
|
|
PIC18F2550-I/SOMicrochip Technology / Atmel
|
x 1 | |
|
BD04C&K
|
x 1 | |
|
BD07C&K
|
x 1 |
Description
Training Board for PIC18F2550
This project implements a minimal training board for a PIC18F2550 microcontroller including switch inputs, led outputs and trimmed analog inputs.
You can see how to solder and assembly this project int the following video:
Features:
- PORT A trimmed analog inputs for AN0-AN3 configurable by a DIP switch array
- PORT A direct input header
- PORT B momentary switch (GND) inputs for RB0-RB7
- PORT B direct input header
- PORT C output LEDs configurable by a DIP switch array
- PORT C direct input header
- ISCP port
- USB support
- Reset switch
Schematic and Layout
Schematics for PIC18F2550 training board
Schematics.jpg
Jun 16,2022
1,046 views
end-flag
Training Board for PIC18F2550
A compact training board for a PIC18F2550 microcontroller including configurable switch inputs, led outputs and analog trimmed inputs.
1046
2
0
9.00 (1)
Published: Jun 16,2022
Download Gerber file 10
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(0)
- Likes(2)
Log in to post comments.
Upload photo
0 / 10000
VOTING
1 votes
- 1 USER VOTES
9.00
- YOUR VOTE 0.00 0.00
-
9design
-
9usability
-
9creativity
-
9content
9.00
More by Alvaro Gomez
-
Digital Sand Clock Controller
This is a controller for a Digital Sand Clock, using persistence of vision in combination with strob...
-
Header extension for 500W Spindle
This design provides a header extension to a generic 500W spindle for desktop CNCs. The header conta...
-
Training Board for PIC18F2550
This project implements a minimal training board for a PIC18F2550 microcontroller including switch i...
You may also like
-
-
-
Modifying a Hotplate to a Reflow Solder Station
858 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
444 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1094 4 2 -
How to measure weight with Load Cell and HX711
692 0 3
