Description
VK5TM Simple DDS VFO
A Simple DDS based VFO using an 8-pin PIC and AD9850/51 module
It is a VFO that can be used just as an ordinary transistor/fet VFO would be. This has been kept as simple as, any buffering, amplification or filtering is left up to you to build to suit your purposes.
All the project details and the PIC code to build this can be found in the link to the project webpage below.
You will also find the Software for the Philips PM5326 DDS mod at the same link.
Schematic and Layout
VK5TM Simple DDS VFO webpage
https://vk5tm.com/homebrew/dds_vfo_8/dds_8.php
Oct 22,2022
1,881 views
end-flag
VK5TM Simple DDS VFO
1 Layers PCB 50.8 x 50.8 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
A Simple DDS based VFO using an 8-pin PIC and AD9850/51 module
1881
0
0
Published: Oct 22,2022
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(0)
- Likes(0)
Log in to post comments.
Upload photo
0 / 10000
More by Terry
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
397 0 4 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
239 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
635 4 2 -
How to measure weight with Load Cell and HX711
504 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
595 1 0
