Wifi Throttle
This project is created for my Wifi LokRemote project (https://github.com/nygma2004/Wifi_LokRemote) so I can control my locos using a physical control as opposed to a mobile phone. This project contains a ESP32 Wifi microcontroller which is communicating with the Wifi LokRemote over wifi sending direction, speed, light and sound commands over UDP messages.
I have done all the documentation for this project on my GitHub page: https://github.com/nygma2004/Wifi_Throttle
You find the 3D printed case, the arduino code, schematic and the BOM there.
Wifi Throttle
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Csongor Varga
-
Flicker free train light
This small circuit board is a power buffer for a model train coach lights, to provide flicker free l...
-
Flipper Zero tester board
This board is designed for the Flipper Zero and to be used with 3 specific Flipper Zero application:...
-
Modbus to MQTT board version 2
This is my second version of the ESP Modbus board (first version: https://www.pcbway.com/project/sha...
-
Input Selector
I am using this board to pre-select power supply for me garden layout. I primarily use Marklin Digit...
-
Home Sensor Board
I built this board so I can assemble various ESP8266 based sensors using easily available breakout b...
-
Wifi Throttle
This project is created for my Wifi LokRemote project (https://github.com/nygma2004/Wifi_LokRemote) ...
-
ESP32 Wifi LocoRemote
This project is a wifi controller for large scale garden railway locomotives. It uses a ESP32 microc...
-
RFID, iButton MQTT Access Control
This ESP8266 sketch communicates with a Wiegand RFID reader and keypad. Ket features:Connect ot loca...
-
PxMatrix ESP8266 Driver
This is my simple PCB design to drive Px Matrix displays with an ESP8266.So far I have used this to ...
-
ESP8266 Modbus board
This board uses an ESP8266 and an RS486 to TTL converter to allow the ESP to access devices over Mod...
-
DHT22 Sensor Node with ESP8266-01
### DESCRIPTIONI was asked to create 10 temperature sensors for a Blynk project. I designed to above...
-
Station Announcement for model train layouts
### DESCRIPTIONI am building a model train layout with my kids. I decided to add station announcemen...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
125 0 0 -
DIY Laser Power Meter with Arduino
175 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
165 0 2
