PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Help Center
Sending a message
9:00 - 23:00, Mon.- Sun. (GMT+8)
Service hotlines
+86 571 8531 7532

9:00 - 18:00, Mon.- Fri. (GMT+8)

9:00 - 12:00, Sat. (GMT+8)

(Except Chinese public holidays)

How can we help?

Edge Connector

Edge connectors achieve electrical connection by contacting the golden fingers on the PCB. If your design includes golden finger, please check 'Yes' for this item and select the surface finish method and bevelling angle for it. Otherwise, please check 'No'.

edge_connector_1.png

Now, let's watch a video to learn more about gold fingers.

PCBWay Commonly Used Gold Finger Chamfer Parameters

Edge chamfer is the process of creating a transitional edge between the two surfaces of a circuit board, usually done on the outer edge of the board. The chamfer allows the gold fingers to smoothly insert into edge connectors of other PCBs. PCBWay commonly used gold finger chamfer parameters are shown in the table below:

edge_connector.png

edge_connector_3.png

Note: PCBWay can also produce gold fingers with a chamfer angle of 60°.

         Gold finger chamfer angle tolerance: +/- 5°.

         Gold finger chamfer height tolerance: +/- 5 mil.


Last updated on 07/06/2024
Comments (0)
This message here is only a suggestion supplement to the above content, and does not for trading operations such as orders. If you have any urgent questions or order issues, please contact your sales rep.
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000