Jonnathan Mackey
UNITED STATES OF AMERICA • + Follow
Description
4 Port RJ11 4P4C v1.0
This board is part of a multi board project used to monitor multiple temperature sensors and report out of range conditions to your cell phone via SMS.
A more detailed description of the project is available here.
Mar 25,2022
685 views
4 Port RJ11 4P4C v1.0
2 Layers PCB 20 x 60 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Part of a multi board project used to monitor multiple temperature sensors and report out of range conditions to your cell phone via SMS.
685
0
0
Published: Mar 25,2022
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jonnathan Mackey
-
STM32F103RE 3 Axis CNC v1
See my Instructable for a full implementation example here.All end stops, stepper driver fault lines...
-
PT226x Remote v1.1
This is a remote encoder board that supports several versions of PT226x encoder chips in a number of...
-
Dust Collector Monitor v4
This is the 4th version of my dust collector monitor. See my instructable for a full description of ...
-
3.5 inch 480x320 TFT Display v1.1
3.5 inch 480x320 TFT Display v1.1Display sourceThis is a 3.5 inch ILI9488 320x480 display module tha...
-
4 inch 480x320 TFT Display v1.1
4.0 inch 480x320 TFT Display v1.1Display sourceThis is a 4 inch ILI9488 320x480 display module that ...
-
12 pin FFC Display Adaptor v1.0
12 pin FFC Display Adaptor v1.0This is a breadboard adapter for use with my boards that have a 12 pi...
-
ILI9488 Display Adapter v1.0
ILI9488 Display Adapter v1.0This adapter board converts the 14 pin header found on many display modu...
-
Heating System Monitor
This board is used to monitor the heating system in your home by reflecting the state of the alarm t...
-
4G LTE TempSensor v1.2 (SIM7000)
This board is used to monitor multiple temperature sensors and report out of range conditions to you...
-
4 Port RJ11 4P4C v1.0
This board is part of a multi board project used to monitor multiple temperature sensors and report ...
-
BMP280 RFM69CW Remote
See my instructable for a full description of this board and the associated software.Part of my hiki...
-
RFM69 3 Button Remote
See my instructable for a full description of this board and the associated software.Remote control ...
-
Hiking Data Logger Using RFM69CW
This hiking data logger is used to record a hike’s location, start and end time, temperature, altitu...
-
AVR SD Hex Loader ISP v1.4
This project is all about getting your compiled sketch onto your target board without the need to ha...
-
Blast Gate Sensor
This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or clo...
-
Dust Collector Monitor
This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When e...
-
AVR SD Hex Loader ISP
See my instructable for a full description of this board and the associated software.Note that there...
-
5 Button Board
This is a simple 5 button board. It can be used with a 2x3 2.54 header OR a 6 pin 1mm pitch FFC conn...
You may also like
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
56 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
57 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
78 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
422 0 6 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
129 0 2
