Jonnathan Mackey
UNITED STATES OF AMERICA • + Follow
Description
AVR SD Hex Loader ISP v1.4
This project is all about getting your compiled sketch onto your target board without the need to have a connection to a computer running the Arduino IDE.
See my instructable for a full description of this board and the associated software.
This board, if mounted in the 3D case specified in my instructable, uses two additional boards: 240x240 TFT LCD Display Module, and 5 Button Board.
This version fixes:
- The heartbeat status LED was on a pin associated with a timer used by the RTC so it was flashing rather than fading in and out as expected. This LED is now on PD4.
- The Status LED connector is now mounted on the back of the board. If mounted on the front it won't fit in the enclosure.
- The RTC battery holder is moved so that it doesn't interfere with the display connector.
Code
https://github.com/JonMackey/AVR_SDHexLoaderISP
Schematic and Layout
https://www.instructables.com/AVR-SD-Hex-Loader-ISP/
Mar 07,2021
1,710 views
AVR SD Hex Loader ISP v1.4
2 Layers PCB 60 x 60 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
This ISP gets your compiled sketch onto your target board without the need to have a connection to a computer running Arduino.
1710
1
0
Published: Mar 07,2021
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jonnathan Mackey
-
STM32F103RE 3 Axis CNC v1
See my Instructable for a full implementation example here.All end stops, stepper driver fault lines...
-
PT226x Remote v1.1
This is a remote encoder board that supports several versions of PT226x encoder chips in a number of...
-
Dust Collector Monitor v4
This is the 4th version of my dust collector monitor. See my instructable for a full description of ...
-
3.5 inch 480x320 TFT Display v1.1
3.5 inch 480x320 TFT Display v1.1Display sourceThis is a 3.5 inch ILI9488 320x480 display module tha...
-
4 inch 480x320 TFT Display v1.1
4.0 inch 480x320 TFT Display v1.1Display sourceThis is a 4 inch ILI9488 320x480 display module that ...
-
12 pin FFC Display Adaptor v1.0
12 pin FFC Display Adaptor v1.0This is a breadboard adapter for use with my boards that have a 12 pi...
-
ILI9488 Display Adapter v1.0
ILI9488 Display Adapter v1.0This adapter board converts the 14 pin header found on many display modu...
-
Heating System Monitor
This board is used to monitor the heating system in your home by reflecting the state of the alarm t...
-
4G LTE TempSensor v1.2 (SIM7000)
This board is used to monitor multiple temperature sensors and report out of range conditions to you...
-
4 Port RJ11 4P4C v1.0
This board is part of a multi board project used to monitor multiple temperature sensors and report ...
-
BMP280 RFM69CW Remote
See my instructable for a full description of this board and the associated software.Part of my hiki...
-
RFM69 3 Button Remote
See my instructable for a full description of this board and the associated software.Remote control ...
-
Hiking Data Logger Using RFM69CW
This hiking data logger is used to record a hike’s location, start and end time, temperature, altitu...
-
AVR SD Hex Loader ISP v1.4
This project is all about getting your compiled sketch onto your target board without the need to ha...
-
Blast Gate Sensor
This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or clo...
-
Dust Collector Monitor
This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When e...
-
AVR SD Hex Loader ISP
See my instructable for a full description of this board and the associated software.Note that there...
-
5 Button Board
This is a simple 5 button board. It can be used with a 2x3 2.54 header OR a 6 pin 1mm pitch FFC conn...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1
