Jonnathan Mackey
UNITED STATES OF AMERICA • + Follow
Edit Project
Description
Blast Gate Sensor
This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or closed. This board is used by my dust collector monitor board. The gate's open/closed state is sent to the dust collector monitor via a CAN bus common to all of the sensor boards and the monitor.
For more information see my instructable on instructables.com.
Mar 04,2021
1,079 views
Blast Gate Sensor
2 Layers PCB 40 x 45 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
This is a blast gate sensor board used to determine whether a gate is open or closed.
1079
0
0
Published: Mar 04,2021
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Jonnathan Mackey
- PT226x Remote v1.1 This is a remote encoder board that supports several versions of PT226x encoder chips in a number of...
- Dust Collector Monitor v4 This is the 4th version of my dust collector monitor. See my instructable for a full description of ...
- 3.5 inch 480x320 TFT Display v1.1 3.5 inch 480x320 TFT Display v1.1Display sourceThis is a 3.5 inch ILI9488 320x480 display module tha...
- 4 inch 480x320 TFT Display v1.1 4.0 inch 480x320 TFT Display v1.1Display sourceThis is a 4 inch ILI9488 320x480 display module that ...
- 12 pin FFC Display Adaptor v1.0 12 pin FFC Display Adaptor v1.0This is a breadboard adapter for use with my boards that have a 12 pi...
- ILI9488 Display Adapter v1.0 ILI9488 Display Adapter v1.0This adapter board converts the 14 pin header found on many display modu...
- Heating System Monitor This board is used to monitor the heating system in your home by reflecting the state of the alarm t...
- 4G LTE TempSensor v1.2 (SIM7000) This board is used to monitor multiple temperature sensors and report out of range conditions to you...
- 4 Port RJ11 4P4C v1.0 This board is part of a multi board project used to monitor multiple temperature sensors and report ...
- BMP280 RFM69CW Remote See my instructable for a full description of this board and the associated software.Part of my hiki...
- RFM69 3 Button Remote See my instructable for a full description of this board and the associated software.Remote control ...
- Hiking Data Logger Using RFM69CW This hiking data logger is used to record a hike’s location, start and end time, temperature, altitu...
- AVR SD Hex Loader ISP v1.4 This project is all about getting your compiled sketch onto your target board without the need to ha...
- Blast Gate Sensor This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or clo...
- Dust Collector Monitor This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When e...
- AVR SD Hex Loader ISP See my instructable for a full description of this board and the associated software.Note that there...
- 5 Button Board This is a simple 5 button board. It can be used with a 2x3 2.54 header OR a 6 pin 1mm pitch FFC conn...
- 128x64 LCD Display Module This is an adapter board for a 128x64 LCD display.See https://www.aliexpress.com/item/1430380449.htm...
You may also like
-
-
-
-
Digispark DIY: Open-Source ATtiny85 USB Arduino PCB Design Files
77 0 2 -
2.4GHz receiver circuit using ESP32, nRF24L01 with IC motor controller L298N
55 0 0 -
Somei70 keyboard PCB - 70 key alternative layout
54 0 1 -
-
STM32 BLDC Motor driver (RPI Front-end)
123 0 0