Hello,

This board has been tested on the Amiga 500 port-1 connected with a PS/2 mouse and standard joystick. (Pressing fire button activates joystick, pressing any button on mouse activates mouse.)

If you have a PIC16F628(A) and a PIC-Programmer, you can make your own Amiga PS/2 mouse converter adapter, with this circuit-board easily.

REV.3 also contains an input for standart 9 pin Amiga joystick. This dual-input adapter acts like a Y-Cable that can be used to simultaneously plug both PS/2 compatible mouse and 9 pin standart Amiga joystick to your Amiga computer. Switching between joystick and mouse is easy; Pressing fire button activates joystick, pressing any button on mouse activates mouse.

This Amiga PS/2 Mouse Converter adapter supports; three mouse buttons, most of optical PS/2 mice and some of USB mice (supporting PS/2 communication protocols) (with a simple and cheap USB to PS/2 converter.)

You need to download .HEX file and program it in to PIC16F628(A), from this link,

https://archive.org/download/amiga-ps-2-mouse-pic-16-f-628/AMIGA_PS2_MOUSE_PIC16F628.zip

COMPONENTS:

PIC16F628A or PIC16F628 (Requires Programming)

DIP18 IC SOCKET

DB9F D-SUB 9 PIN SOLDER TYPE FEMALE CONNECTOR - You can remove the metal cover if necessary (for A600)

DB9M D-SUB 9 PIN SOLDER TYPE MALE CONNECTOR

6PIN RIGHT ANGLE PS/2 FEMALE PCB TYPE MINI DIN CONNECTOR

100nf CAPACITOR

In order to protect your electronical devices, always turn off your Amiga before connecting or disconnecting the cables or any other device.

Gerber files can be changed at any time. Before paying for the PCBs, be sure to update your orders!

Use this PCB at your own risk !

Have fun

Thank you.