Hello,

This is an Easy DIY project, all components are through hole, marked on the PCB, Easy to solder, Easy to make ;)

This tactile button keyboard is a mini DIY C64 keyboard.

This PCB works as a real Commodore 64 Keyboard.

You can use this faceplate PCB for C64 USB KEYBOARD

https://www.pcbway.com/project/shareproject/COMMODORE_64_KEYBOARD_FACEPLATE_FOR_TACTILE_BUTTON_KEYBOARD_PROJECTS_e0a4cbf4.html

Many thanks to artist Cem Tezcan (Blockmind) for his patience and contribution to working together.

COMPONENTS:

66pcs. 6x6x7mm 4-pin through hole tactile buttons (7mm when using 1.6mm faceplate PCB)

3mm Red LED

470ohm - 1K 1/4watt RESISTANCE (value changes LEDs brightness)

Single row right angle male header 2.54mm pitch (20 pin), (Optional)

6pcs. screws and nuts. Fixing screw holes 3mm in diameter. (If using faceplate PCB)

In order to protect your electronical devices, always turn off your Commodore C64C before connecting or unconnecting any device.

Gerber files and component list are subject to change without notice. Before paying for the PCBs, be sure to update your orders!

As you can see I have uploaded many projects and I am still working on new projects. If you have any questions, please look for answers online. Unless I specify explicitly, all my projects are tested and confirmed to work under normal circumstances before being shared. I'm sorry I didn't have enough time to answer all the questions.

Use this PCB at your own risk !

Have fun

Thank you.

C64istanbul