|
|
ATtiny3226 |
x 1 | |
|
|
capacitor 100nF |
x 7 | |
|
|
Resistor 5.1k |
x 1 | |
|
|
USB4125-GF-AGCT
|
x 1 | |
|
|
Capacitors 47uF - 1206 |
x 2 | |
|
|
Resistor 330R -0805 |
x 1 | |
|
|
LD1117S33TRST MicroElectronics
|
x 1 |
|
KiCADKicad
|
ATtiny3226 Dev Board
Hello, I would like to present a project for learning to program Dev Board ATtiny3226. The board uses the basic components needed to get started. The board can be powered by 5V or 3.3V by selecting the appropriate jumper, when we connect an external power supply above 5V we use only the 3.3V power supply
I used a double goldpin pin - thanks to this solution, we can plug in a given component, and e.g. a logic state analyzer for waveform analysis. All that remains is to connect the modules and start programming :)
The purpose of this board is so that the person who starts playing with the microcontroller does not have to wonder whether something connects to the MCU or not, soldering everything into the board, we can start. We connect what modules we want in the form of: diode, button, display, buzzer and we can work, realize a lot of different interesting projects. So I encourage you to have fun :)
ATtiny3226 Dev Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
Log in to post comments.
More by Michal Misiek_86
-
ATtiny3226 Dev Board
Hello, I would like to present a project for learning to program Dev Board ATtiny3226. The board use...
-
ATtiny85 Dev Board
Hi, I would like to present another project. A board for ATtiny85. This is a board to be able to sta...
-
Arduino module - Led+Switch
A board to play with leds and buttons for Arduino and other boards.
-
attiny 13/25/45/85 adapter
board for connecting ATtiny 13/25/45/85 and SOP 8 clip, thanks to this board we can program uC easil...
-
AVR Dev Board
I would like to present the AVR328 Dev Board project. The project is based on ATmega 328, and the ne...
-
AVR128DA UPDI Dev Board
Hello, it's time to test the new DA series microcontrollers, so as not to play on the breadboard, th...
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1008 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
545 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1278 4 2 -
How to measure weight with Load Cell and HX711
767 0 3
