|
KiCADKicad
|
AVR Dev Board
I would like to present the AVR328 Dev Board project. The project is based on ATmega 328, and the needed power supply including ADC to use. We don't have to play with the board, connect the wires, just solder everything and we can use, learn programming of ATmega328 microcontroller. Thanks to this solution, we know that from the hardware side everything is fine, but if there is an error, then only something in the code is wrong. We can connect various Arduino modules to the board or make a set of modules ourselves, e.g. displays, buttons, LEDs etc. :) I used double goldpin output, if we would like to connect with logic analyzer. The board can be powered via the programmer, usb C and goldpin max 5V
AVR Dev Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
9design
-
10usability
-
10creativity
-
10content
More by Michal Misiek_86
-
ATtiny3226 Dev Board
Hello, I would like to present a project for learning to program Dev Board ATtiny3226. The board use...
-
ATtiny85 Dev Board
Hi, I would like to present another project. A board for ATtiny85. This is a board to be able to sta...
-
Arduino module - Led+Switch
A board to play with leds and buttons for Arduino and other boards.
-
attiny 13/25/45/85 adapter
board for connecting ATtiny 13/25/45/85 and SOP 8 clip, thanks to this board we can program uC easil...
-
AVR Dev Board
I would like to present the AVR328 Dev Board project. The project is based on ATmega 328, and the ne...
-
AVR128DA UPDI Dev Board
Hello, it's time to test the new DA series microcontrollers, so as not to play on the breadboard, th...
-
-
-
Modifying a Hotplate to a Reflow Solder Station
687 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
369 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
901 4 2 -
How to measure weight with Load Cell and HX711
607 0 3
