nopnop2002
JAPAN • + Follow
Description
EBYTE SPI LoRa module pitch converter
EBYTE's SPI module is a 1.27mm pitch SMD module.
So I designed a conversion board that converts from 1.27mm pitch to 2.54mm pitch.
Driver for esp32 is here.
https://github.com/nopnop2002/esp-idf-sx126x
Driver for arduino is here.
Feb 25,2023
809 views
EBYTE SPI LoRa module pitch converter
809
2
0
Published: Feb 25,2023
Download Gerber file 16
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by nopnop2002
-
esp32s2 st7789 pcb
This PCB can mount ST7789 TFT of various sizes.This board uses ESP32S2 Mini for SoC.You can download...
-
esp32s2 ssd1306 multi pcb
This PCB can mount 0.96 inch and 1.3 inch SSD1306.This PCB supports both I2C and SPI interfaces.This...
-
EBYTE SPI LoRa module pitch converter
EBYTE's SPI module is a 1.27mm pitch SMD module. So I designed a conversion board that converts fro...
-
OrangePi OLED HAT
I have some Orange Pis.In both cases, the IP address is obtained from DHCP.Therefore, the IP address...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
129 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
187 1 1
