nopnop2002
JAPAN • + Follow
Components
|
|
Orange Pi with 26 pins. |
x 1 | |
|
|
26pin socket |
x 1 | |
|
|
ssd1306 with i2c |
x 1 |
Description
OrangePi OLED HAT
I have some Orange Pis.
In both cases, the IP address is obtained from DHCP.
Therefore, the IP address is displayed on the OLED at startup.
You can download the tool from here.
This tool is available for OrangePi series.
Nov 26,2020
1,575 views
OrangePi OLED HAT
2 Layers PCB 22.9 x 40.6 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
Attachment for attaching OLED to Orange Pi.
It can be attached to ZERO, ZERO-Plus, Lite2, One +.
1575
0
0
Published: Nov 26,2020
Download Gerber file 9
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by nopnop2002
-
esp32s2 st7789 pcb
This PCB can mount ST7789 TFT of various sizes.This board uses ESP32S2 Mini for SoC.You can download...
-
esp32s2 ssd1306 multi pcb
This PCB can mount 0.96 inch and 1.3 inch SSD1306.This PCB supports both I2C and SPI interfaces.This...
-
EBYTE SPI LoRa module pitch converter
EBYTE's SPI module is a 1.27mm pitch SMD module. So I designed a conversion board that converts fro...
-
OrangePi OLED HAT
I have some Orange Pis.In both cases, the IP address is obtained from DHCP.Therefore, the IP address...
You may also like
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
65 1 1 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
65 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
90 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
463 0 7 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
137 0 2 -
