Daniel Scheidler
GERMANY • + Follow
Description
LED-stairlight (with fade) by SmartHome yourself
This PCB is for my motion-controlled stairlight.
This PCB is desigend for up to 16 stair steps.
Motion detection based on PIR-Sensors.
This version is with fading. If you don't want your LEDs fade-in and out use this project:
https://www.pcbway.com/project/shareproject/LED_stairlight__without_fade__by_SmartHome_yourself.html
You can find an interactive BOM to see where any part has it's place here:
https://smarthomeyourself.de/Platine/Materials.html
All needed Parts for PCB are documented here: (external Parts like Motion-Sensors and LED-Stripes are not included in this list)
The software for this project contains a lot of optional settings to configure the behaviour to your needs.
You can configure for example:
- set on/off the lightlevel-sensor to lightup only at night (when the room is dark)
- analog or digital sensors for activate/deactivate lights
- animation on/off
- speed of animation
- speed of light on and off
- timing of delays
You can download the sketch for Arduino here:
https://github.com/danielscheidler/SHYS-Treppenlauflicht-Ohne-LAN
In this videos you can see the stairlight in action:
https://www.youtube.com/watch?v=VJfymwNkr7A&feature=youtu.be&t=396
https://youtu.be/A9EpBSxqn-o?t=130
Full documentation (german) you can find at:
https://smarthomeyourself.de/treppe
https://www.youtube.com/watch?v=VJfymwNkr7A&feature=youtu.be&t=396
Code
https://github.com/danielscheidler/SHYS-Treppenlauflicht-Ohne-LAN
Schematic and Layout
https://smarthomeyourself.de/treppe
Sep 24,2020
8,899 views
end-flag
LED-stairlight (with fade) by SmartHome yourself
2 Layers PCB 100 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Blue Solder Mask, White silkscreen
A motioncontrolled LED-stairlight with fading and optional animation in walking-direction.
8899
19
23
8.38 (6)
Published: Sep 24,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(23)
- Likes(19)
VOTING
6 votes
- 6 USER VOTES
8.38
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
2design
-
3usability
-
4creativity
-
6content
3.75
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
6design
-
8usability
-
6creativity
-
6content
6.50
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Daniel Scheidler
-
RGB LED Stairlight
This is my new stairlight with RGB-LEDs. Motion-Sensor on top and bottom of the stairs to autoswitch...
-
8 in 1 Sensor for Home Assistant
This PCB is an 8 in 1 Sensor for Home Assistant. The NodeMCU is flashed with ESPHome with the follow...
-
12V RGB Stripe Controller WiFi (for Home Assistant / ESPHome)
This PCB is designed to control non-adressable RGB-LED-Stripes in Home Assistant with ESPHome. Full ...
-
RF to MQTT Bridge for Home Assistant
THIS PCB SEEMS TO BE UNSTABLE! Will NOT be continuedPCB for OpenMQTTGateway as RF to MQTT Bridge for...
-
LED-stairlight (without fade) by SmartHome yourself
This PCB is for my motion-controlled stairlight. This PCB is desigend for up to 16 stair steps.Motio...
-
LED-stairlight (with fade) by SmartHome yourself
This PCB is for my motion-controlled stairlight. This PCB is desigend for up to 16 stair steps.Motio...
-
Solar Einspeise-Regelung
Cooperation between UTUBERLARS and SmartHome yourself.This PCB is designed to switch the output volt...
-
Barcode scanner made for ESPHome
The project was created to fill my shoppinglist by scanning ean/gtin codes.All project informations ...
-
Neopixel-Ring RGB Clock (with ESPHome for Home Assistant)
RGB-Clock with ESPHome for Home Assistant.Use Neopixel-Ring with 60 LEDs to show current Time.To dis...
-
Smart Garage-Door control with animated RGB-LED (with or without Home Assistant)
Standalone:automated RGB-LED-Animation when door is opening / closingAdditional features when using ...
-
FPV Laptime Tracker
The Project is to track laptimes of FPV Racing Drones in races. No modification of the FPV Copter is...
-
Integrate every doorbell in Home Assistant
This PCB was designed to integrate my old doorbell into Home Assistant.The board uses the transforme...
-
RGB LED Ambiente light
Panel with 3 PCBs of my ambience rgb led light with on/off- and color-switch button.More Details abo...
-
RGB LED Stairlight
This is my new stairlight with RGB-LEDs. Motion-Sensor on top and bottom of the stairs to autoswitch...
-
8 in 1 Sensor for Home Assistant
This PCB is an 8 in 1 Sensor for Home Assistant. The NodeMCU is flashed with ESPHome with the follow...
-
12V RGB Stripe Controller WiFi (for Home Assistant / ESPHome)
This PCB is designed to control non-adressable RGB-LED-Stripes in Home Assistant with ESPHome. Full ...
-
RF to MQTT Bridge for Home Assistant
THIS PCB SEEMS TO BE UNSTABLE! Will NOT be continuedPCB for OpenMQTTGateway as RF to MQTT Bridge for...
-
LED-stairlight (without fade) by SmartHome yourself
This PCB is for my motion-controlled stairlight. This PCB is desigend for up to 16 stair steps.Motio...
-
LED-stairlight (with fade) by SmartHome yourself
This PCB is for my motion-controlled stairlight. This PCB is desigend for up to 16 stair steps.Motio...
-
Solar Einspeise-Regelung
Cooperation between UTUBERLARS and SmartHome yourself.This PCB is designed to switch the output volt...
-
Barcode scanner made for ESPHome
The project was created to fill my shoppinglist by scanning ean/gtin codes.All project informations ...
-
Neopixel-Ring RGB Clock (with ESPHome for Home Assistant)
RGB-Clock with ESPHome for Home Assistant.Use Neopixel-Ring with 60 LEDs to show current Time.To dis...
-
Smart Garage-Door control with animated RGB-LED (with or without Home Assistant)
Standalone:automated RGB-LED-Animation when door is opening / closingAdditional features when using ...
-
FPV Laptime Tracker
The Project is to track laptimes of FPV Racing Drones in races. No modification of the FPV Copter is...
-
Integrate every doorbell in Home Assistant
This PCB was designed to integrate my old doorbell into Home Assistant.The board uses the transforme...
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
362 0 3 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
227 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
597 4 2 -
How to measure weight with Load Cell and HX711
492 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
585 1 0
Hi, der Plan liegt bei uns auf dem Discord im Supportbereich der Treppenbeleuchtung: https://media.discordapp.net/attachments/504574285008994305/814226970149388288/unknown.png
Vielen Dank! Ich habe ihn :-) Hoffentlich funktioniert nachher alles. Viele Grüße, A.Eisfeld
Das Prinzip sollte auch für 24V funktionieren. Getestet hab ich es nicht. Vom Gefühl her würde ich aber sagen ja.
Danke :) Da die D1 nicht für größere LED-Anzahl ausgelegt war und eh "nur" als Verpolungsschutz diente haben wir diese nachträglich wieder entfernt. Bei weiteren Fragen uzm Projekt schau gerne auf unserem Discord vorbei: https://smarthomeyourself.de/discord LG
Vielen Dank! :)
Hi Adrian, bei dieser Variante nicht, da rgb-Stripes ja anders angesteuert werden müssen. Da reicht ja kein einfaches an/aus. Entweder benötigt man ja ein PWM-Signal oder für Adressierbare RGBs eine Datenleitung und ggf Clock. Eine RGB-Beleuchtung habe ich aber ebenfalls umgesetzt. Im Video stelle ich das ganze nur als lange Stripe neben der Treppe vor. Inzwischen habe ich die Animationen aber so überarbeitet, dass auch ein stufenweises einschalten mit adressierbaren LEDs funktioniert. Das Video dazu incl. veröffentlichung der Codes kommt denke ich anfang Mai. Falls du vorher los legen willst komm einfach mal auf unseren Discord und sprech mich gerne an. https://smarthomeyourself.de/discord
Hi, was fehlt denn? schreib gerne eine Mail an support@smarthomeyourself.de LG Daniel
Hi, ja da hast du recht. Da die D1 nicht für größere LED-Anzahl ausgelegt war und eh "nur" als Verpolungsschutz diente haben wir diese nachträglich wieder entfernt.
thank you