Martin Refseth
NORWAY • + Follow
Components
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
MBC5 E-Ink Flashcart | 4MB Flash | FRAM |
This is an MBC5 Flashcart with an E-Ink display, this means you can change labels or roms at any time.
Flashing the RP2040
- Download the latest version of Circuitpython for the Raspberry pi Pico
- Connect the cart using a USB A to C cable, and drop the circuitpython .uf2 file onto the device
- One the Circitpy device pops up, move the files that correspond to your display from "Circuitpy Files" onto your device
Changing the image
To change the image, drop a BMP that matches your display's specs (1 bit or 2 bit, and 152x152, or 200x200) onto the "CircuitPy" drive.
Code
Github
https://github.com/HDR/MBC5_E-Ink_Flashcart
Aug 24,2022
4,010 views
MBC5 E-Ink Flashcart | 4MB Flash | FRAM |
2 Layers PCB 60.7 x 51 mm FR-4, 0.8 mm, 1, Immersion gold, Green Solder Mask, White silkscreen
A Flashcart with an E-Ink Display
4010
8
0
10.00 (1)
Published: Aug 24,2022
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
Topic
- Comments(0)
- Likes(8)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
VOTING
1 votes
- 1 USER VOTES
10.00
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Martin Refseth
-
Machined DS Cartridge
A machined Nintendo DS cartridge for Original GamesThese are machined replacement housings for origi...
-
Game Boy Camera Flashcart | 2x1MB | FRAM |
Please read the license!What is it?This is a reflashable game boy camera, it uses parts of an origin...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Crystal Clear Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Suicune Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
DualShock4 USB Type C [JDS-001/JDS-011]
PS4 Controllers, but with USB C
-
Machinable|3D Printable Switch Cartridge
Current revision untested, but should work, order at your own risk.A replacement enclosure for Ninte...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition | Advanced PCB
This is the advanced pcb version of these intended for ordering non standard colors or finishes.
-
CR1616 Battery Retainer for Game Boy Advance Games | "Prototype"
Please keep in mind that these are prototypes, i can't guarantee that they will be as reliable as CR...
-
Please check link for updated project
The last project was accidentally shared as a single layer board, please use this link instead https...
-
CR2Retainer | Game Boy Cart battery retainer for CR2025/CR2032 cells
Tabbed CR cells are hard to find in a large part of the world, these flex pcb's let you use standard...
-
Les Paul ZMK-Hero
This is a replacement bluetooth enabled mainboard for Les Paul PS3 Guitar Hero controllers with a 13...
-
Machined Game Boy Cartridge
A Machined Game Boy cartridge for Original games or OEM style FlashcartsOrdering:Front:Make sure to...
-
AGB-E02-20 | Game Boy Advance | Replacement PCB | V2
New in Version 2:Updated Traces to be 1 to 1 with an original boardUpdated Copper Fill to be 1 to 1 ...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition
Single post Coral edition of the MBC30 flashcart
-
Mini Game Boy Camera Flashcart | 1MB | FRAM |
Please read the license!
-
Game Boy Cartridge Housing | 3D Printed
"OEM" style cartridge housing, fits original single post games & MBC based flashcarts.
-
MBC5 Flashcart Christmas Tree Edition | 4MB Flash | FRAM
A simple MBC5 flashcart shaped like a christmas tree, should fit an original (or Cloud Game Store) c...
-
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
A simple flashcart that uses an MBC5 from an original cartridgeChanges in V3:Added rumble support, t...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
