MOON AND THE SANTA'S SILHOUETTE
MOON AND THE SANTA'S SILHOUETTE
This is a tested PCB.
This project is based on the semi-transparent characteristic of PCB material.
I tried new techniques in this project. For making a blurred moon surface effect, I applied small copper grains at the back side of the PCB. There may be problems with this grainy texture during the "PCB surface finish" process.
Please add that sentence to manufacturing note: "Please use Gerbers as is."
Thank You
Have fun.
I wish you a happy new year. :)
COMPONENTS:
2pcs 8pin right angle header (will be soldered for fixing two parts at 90 degree)
3pin 2.54mm SPDT slide SWITCH (for on/off)
CR2032 Battery holder
CR2032 Battery
150 OHM 0.25 watt resistance
5mm Diffused Blue Colour LED,
4pcs SMD1206 LED (Optional)
4pcs SMD1206 resistance (Ohm value depends led lumination) (Optional)
This PCB can also be used as a tea light candle holder, without any components ;)
MOON AND THE SANTA'S SILHOUETTE
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(7)
More by (DIY) C64iSTANBUL
-
SD2iEC & EPYX FAST LOAD CARTRIDGE V2.1B (Micro SD) for COMMODORE
SD2iEC & EPYX FAST LOAD CARTRIDGE V2.1B (Micro SD) for COMMODOREHello,This is a tested and worki...
-
(DIY) COMMODORE 64 DEAD-TEST (781220) DIAGNOSTIC CARTRIDGE
(DIY) COMMODORE 64 DEAD-TEST (781220) DIAGNOSTIC CARTRIDGEThis is a C64 Dead-Test (781220) diagnosti...
-
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE This is a Commodore C128, C128D, C128DCR 785260 ...
-
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
COMMODORE 128 15KHz DISPLAY ADAPTER.RGBI to RGB converter for VDC output.Hello, This is a tested an...
-
PCB HOUSE WITH LED LIGHT (DECORATION)
PCB HOUSE WITH LED LIGHT (DECORATION)Hello,PCB Thickness: 1mmCOMPONENT LISTCR2032 BatteryCR2032 Batt...
-
CGTR COMMODORE AMIGA COASTER V2B
CGTR COMMODORE AMIGA COASTER V2BHello,This is another version of CGTR Commodore Amiga CoasterDiamete...
-
(DIY) COMMODORE VIC-20 GAME CARTRIDGE for 8x 8KB ROMs
(DIY) COMMODORE VIC-20 GAME CARTRIDGE 8x 8KBYou can make your own custom Commodore VIC-20 Multi Game...
-
AMIGA PS/2 MOUSE CONVERTER ADAPTER REV.3 (WITH JOYSTICK INPUT)
Hello,This board has been tested on the Amiga 500 port-1 connected with a PS/2 mouse and standard jo...
-
(DIY) AMIGA 500 - SWITCHLESS BOOT DRIVE SELECTOR Rev.3 (RETRO VERSION of 3 RESET BOOT DRIVE SELECTOR)
(DIY) AMIGA 500 - SWITCHLESS BOOT DRIVE SELECTOR Rev.3(RETRO VERSION of 3 RESET BOOT DRIVE SELECTOR)...
-
AMIGA 4 PLAYER JOYSTICK ADAPTER
(DIY) AMIGA 4 PLAYER JOYSTICK ADAPTERHello,This is a tested and working project.This Amiga Four Play...
-
BARE METAL COMMODORE 64 EMULATOR GEEKS' EDITION GPIO CONFIG2
BARE METAL COMMODORE 64 EMULATOR(GPIO CONFIG2) (GEEKS' EDITION)Many thanks to Randy Rossi for BMC64 ...
-
COMMODORE 64 TACTILE BUTTON MINI KEYBOARD
Hello,This is an Easy DIY project, all components are through hole, marked on the PCB, Easy to solde...
-
COMMODORE 64 KEYBOARD FACEPLATE FOR TACTILE BUTTON KEYBOARD PROJECTS
Hello,This PCB is a Commodore 64 tactile buttons keyboard faceplate for some of my projects.It is pr...
-
SD2iEC with BROWSER CARTRIDGE (MICRO-SD) for COMMODORE 64
SD2iEC with BROWSER CARTRIDGE (MICRO-SD VERSION) for COMMODORE 64SD2iEC (Commodore 64 disk drive emu...
-
SD2iEC (COMMODORE 64 DISK DRIVE EMULATOR) POWERED from USER PORT (MICRO-SD VERSION)
Hello, This is a tested and working project. (Tested on Commodore 64 and Commodore VIC-20)This is a...
-
XANTHOS ARCH Commmodore, Atari 9-pin DIY Game Controller
Hello,This is a tested and working project.XANTHOS ARCH is a small, simple, DIY, 9 pin game controll...
-
AMIGA SCART CABLE CONNECTION EASY PCB
Hello,This is a tested and working project.This Amiga scart cable connection PCB is an Easy DIY proj...
-
IMPOSSIBLE MISSION GAME CARTRIDGE for COMMODORE 64
IMPOSSIBLE MISSION GAME CARTRIDGE for COMMODORE 64Hello, This is a tested and working circuit board....
-
-
-
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
229 0 0 -
