SerVoControl
HI, Servo's, the small cheap ones, are getting more and more used in model rail road lay outs. They can move switches, open bridges and much more. But there is not a good commercial controller on the market for the model rail road application. So I made one myself.
This controller, based on a Arduino UNO, can control up to 8 servo by DCC digital commands. But can also be controlled by common analog switches so very versatile. Every servo can have 4 addressable positions. Off course all positions can be adjusted, speed of the movement and much more. You can find a manual (in Dutch....sorry...) on the website.
Please feel free to use the designs.
Rob.
SerVoControl
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
More by Rob Antonisse
-
-
-
Modifying a Hotplate to a Reflow Solder Station
685 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
369 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
898 4 2 -
How to measure weight with Load Cell and HX711
607 0 3
