StePPer driver for model railroads
HI, StePPer is a project based on a attiny85. It is a stepper driver for a unipolair stepper motor like 28byj-48.
it can be used as switch engine or as a continue motor with high torque and very low rotation speed.
It has many parameters that can be set, like position speed.
Besides the button on the pcb you can connect extra buttons.
It has ISP connection so you can reprogram the attiny85 for updates using a standard arduino uno as ISP programmer.
It has a DCC decoder build in so can be controlled by DCC commands. (for model railroad applications.)
Have fun
Rob
StePPer driver for model railroads
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
More by Rob Antonisse
-
-
-
Modifying a Hotplate to a Reflow Solder Station
746 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
403 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
962 4 2 -
How to measure weight with Load Cell and HX711
636 0 3
