Description
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCB
It contains a GSM or LoRa radio module, a solar MPPT charger, a possibility to use the connected solar cell as a pyranometer, a stepper motor driver for the correct alignment of the solar cell and some other features.
It is planned to make the weatherstation also helium capable.
Short introductional video is available here.
Code
GitHub
https://github.com/Nerdiyde/solarSens
Dec 31,2022
1,430 views
solarSens - A 3D printable solar weatherstation
SolarSens is a modular 3D printable weather station.
1430
6
1
6.25 (1)
Published: Dec 31,2022
PCBWay Donate 10% cost To Author
File Last Updated: 2022/12/31 (GMT+8)
File update record
2022-12-3106:38:53
Gerber file is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
- Comments(1)
- Likes(6)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
VOTING
1 votes
- 1 USER VOTES
6.25
- YOUR VOTE 0.00 0.00
-
7design
-
6usability
-
6creativity
-
6content
6.25
More by Nerdiy.de
-
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
-
pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB
An additional overview of the construction and the assembly is also available in the following video...
-
Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules...
-
pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
-
pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module
This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
-
buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
-
Anemosens_Sensor_PCB - Sensor PCB for my 3D printed anemometer "Anemosens"
The Anemosens sensor PCB is the basis for the sensor structure of Anemosens, a 3D printed anemometer...
-
Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens"
The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
-
pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2
The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
-
pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
-
i2c_mtrDrvr V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
i2c_slideR_75 V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
nanoPxl v1.1 by Nerdiy.de
You can find all needed information including detailed build instructions and material list here: ht...
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
109 0 0 -
DIY Laser Power Meter with Arduino
159 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
152 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
548 0 2
