Description
Code
https://nerdiy.de/en/howto-elektronik-nanopxl-v1-1-smd-komponenten-verloeten/
Schematic and Layout
https://nerdiy.de/en/howto-elektronik-nanopxl-v1-1-smd-komponenten-verloeten/
Oct 16,2020
1,876 views
nanoPxl v1.1 by Nerdiy.de
nano Pxl is a more powerfull version of the WS2812. Instead of three 20mA LEDs it uses three 180mA LEDs.
1876
0
0
Published: Oct 16,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Nerdiy.de
-
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
-
pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB
An additional overview of the construction and the assembly is also available in the following video...
-
Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules...
-
pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
-
pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module
This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
-
buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
-
Anemosens_Sensor_PCB - Sensor PCB for my 3D printed anemometer "Anemosens"
The Anemosens sensor PCB is the basis for the sensor structure of Anemosens, a 3D printed anemometer...
-
Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens"
The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
-
pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2
The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
-
pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
-
i2c_mtrDrvr V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
i2c_slideR_75 V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
nanoPxl v1.1 by Nerdiy.de
You can find all needed information including detailed build instructions and material list here: ht...
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
109 0 0 -
DIY Laser Power Meter with Arduino
159 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
152 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
548 0 2
