Feb 28,2021
784 views
end-flag
i2c_mtrDrvr V1.0
i2c_mtrDrvr makes it easy to control DC motors that pull up to 1A. Control of rotation speed is possible. Also load measurement is possible.
784
1
0
Published: Feb 28,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
Upload photo
0 / 10000
More by Nerdiy.de
-
Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens"
The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
-
pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2
The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
-
pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
-
i2c_mtrDrvr V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
i2c_slideR_75 V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
nanoPxl v1.1 by Nerdiy.de
You can find all needed information including detailed build instructions and material list here: ht...
-
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
-
pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB
An additional overview of the construction and the assembly is also available in the following video...
-
Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules...
-
pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
-
pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module
This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
-
buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
-
Anemosens_Sensor_PCB - Sensor PCB for my 3D printed anemometer "Anemosens"
The Anemosens sensor PCB is the basis for the sensor structure of Anemosens, a 3D printed anemometer...
-
Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens"
The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
-
pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2
The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
-
pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
-
i2c_mtrDrvr V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
i2c_slideR_75 V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
nanoPxl v1.1 by Nerdiy.de
You can find all needed information including detailed build instructions and material list here: ht...
-
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
-
pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB
An additional overview of the construction and the assembly is also available in the following video...
-
Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules...
-
pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
-
pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module
This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
-
buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
339 1 3 -
Easy to print simple stacking organizer with drawers
121 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1227 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
703 0 1 -
