pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various animations and information can be displayed.
I use it together with the pxlBlck plugin to display information from my smart home in addition to the time.
For example, animations can be displayed when the doorbell rings or the dishwasher is finished.
For this purpose, the ESP32 is connected to my smart home system via its WiFi interface.
Of course, other data can also be processed in this way. For example, the measured values of a built-in BME280 can be sent to the smart home system via MQTT.
pxlBlck_ringMicro - A micro sized Ring Clock PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Nerdiy.de
-
solarSens - A 3D printable solar weatherstation
The solarSens weatherstation is based on the solarSens PCBIt contains a GSM or LoRa radio module, a ...
-
pxlBlck_10x11mini v1.1 - SK6812 based LED matrix PCB
An additional overview of the construction and the assembly is also available in the following video...
-
Clockception module PCB v1.7
The Clockception board is the basis for a Clockception module. By combining several of these modules...
-
pxlBlck_ringMicro - A micro sized Ring Clock PCB
The pxlBlck_ringMicro PCB is based on the ESP32. In combination with 60 SK6805 RGB LEDs, various ani...
-
pxlBlck_16x16micro v1.2 - 16x16 pixel and 40x40mm big LED matrix module
This is a 40x40mm big 16x16 pixel LED matrix that can be driven by only one MCU GPIO.More info is al...
-
buttonBoard_V1.2 - A multipurpose ESP32 powered IOT button PCB
The ButtonBoard PCB is my attempt to kill several birds with one stone. On the one hand, I’ve always...
-
Anemosens_Sensor_PCB - Sensor PCB for my 3D printed anemometer "Anemosens"
The Anemosens sensor PCB is the basis for the sensor structure of Anemosens, a 3D printed anemometer...
-
Anemosens_MCU - MCU PCB for my 3D printed anemometer "Anemosens"
The Anemosens_MCU Board it will be possible to use Anemosens as a standalone Anemometer that can be ...
-
pxlDigit_PCB - Configurable seven-segment digit IOT PCB V1.2
The idea for the pxlDigit_PCB came to me while building the pxlDigit (build article here: https://ne...
-
pxlBlck_multiPCB - a multi purpose IOT LED-Matrix board
One of my past PCB projects is the "pxlBlck_multiPCB". As the name suggests, this board is the heart...
-
i2c_mtrDrvr V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
i2c_slideR_75 V1.0
Will follow as soon as the build guide on Nerdiy.de is finished
-
nanoPxl v1.1 by Nerdiy.de
You can find all needed information including detailed build instructions and material list here: ht...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
109 0 0 -
DIY Laser Power Meter with Arduino
160 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
152 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
548 0 2
