Aluminum 6061 is the most popular aluminum alloy. It has good strength-to-weight ratio, excellent machinability and natural corrosion resistance.

Aluminum 7075 is an aerospace-grade material with excellent strength-to-weight ratio and strength and hardness comparable to steels.

Aluminum 5052 is a strain hardening aluminum alloy with excellent corrosion resistance. Suitable for marine applications. Can be welded.

Aluminum 2A12(Al-Cu-Mg ) is the hard alloy, its composition is more reasonable and owns better overall performance.

Stainless steel 304 is the most common stainless steel. It is essentially non-magnetic steel and it is less electrically and thermally conductive than carbon steel.

The second most used stainless steel after 304, the general purpose austenitic stainless steel 316 has superior corrosion resistance particularly in chloride containing environments and good elevated temperature strength.

Stainless steel 303 has excellent toughness, but lower corrosion resistance than 304.

Stainless steel 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels.

Stainless steel 201, with certain acid and alkali resistance, high density, no bubbles, no pinholes, etc.

Brass C360 is highly machinable alloy with good tensile strength and natural corrosion resistance. Ideal for parts that require low friction.

Copper has good electrical conductivity, thermal conductivity, ductility, deep drawing and corrosion resistance.

Titanium Gr5 (TC4) is the most widely used titanium grade. It is a two phase a+ß titanium alloy, with aluminum as the alpha stabilizer and vanadium as the beta stabilizer.

Mild steel 1018 is a widely used alloy with good machinability, weldability, toughness, strength, but it’s susceptible to corrosion on the surface.

Mild steel 1045 is a medium tensile carbon steel with good strength and impact properties.

Mild steel A36 is the most commonly used mild and hot-rolled steel.

Alloy steel 4140 is a chromium-, molybdenum-, and manganese-containing low alloy steel.

Alloy steel 4340 is a heat treatable and low alloy steel containing chromium, nickel and molybdenum.

Alloy steel 1215 contains carbon as the significant alloying element. Small quantities of molybdenum, chromium, nickel, aluminium, and copper are present in these steels.

Tool Steel D2 is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure.

Tool Steel A2 is a versatile, air-hardening tool steel that is characterized by good toughness and excellent dimensional stability in heat treatment.

Tool Steel O1 is the original oil-hardening, “non-shrinking” tool steel that can be hardened to the Rockwell C 65 range from a low austenitizing temperature.

Tool Steel A3 is a high quality Cold work tool steel, It belong to the high quality high carbon alloy tool steel.

Tool steel S7 is a shock-resistant air hardening steel and has exceptional impact properties plus the highest hardenability of shock resisting grades of tool steel.

Tool steel H13 is widely used in hot and cold work tooling applications.

Spring steel is used prominently in automotive and industrial suspension applications.

ABS is tough, resilient, allows detailed moldings, and is non-toxic. It is known for its low cost and ease of machining, molding and even 3D printing.

ABS is tough, resilient, allows detailed moldings, and is non-toxic. It is known for its low cost and ease of machining, molding and even 3D printing.

ABS is tough, resilient, allows detailed moldings, and is non-toxic. It is known for its low cost and ease of machining, molding and even 3D printing. Kindly be noted that after CNC machined, it will be matte and translucent by default.

Polycarbonate (PC) is a thermoplastic with high toughness, excellent impact strength and good machinability.

Nylon 6 is widely used engineering thermoplastic characterized by its high toughness and strength.

Nylon 12 is made from ω-aminolauric acid or laurolactam monomers that each have 12 carbons, hence the name ‘Nylon 12’. It is one of several nylon polymers.

Polypropylene (PP) is a thermoplastic polymer resin which has a tough, rigid and crystalline structure from a propene monomer. It’s the second most widely produced plastic (after PE) and is harder and more heat resistant than PE. It has many uses from commercial to industrial applications.

POM or polyoxymethylene is an engineering thermoplastic material, also known as acetal, Delrin, polyacetal or polyformaldehyde.

PTFE is an engineering thermoplastic with excellent chemical and thermal resistance and the lowest coefficient of friction of any know solid.

Polymethyl methacrylate, abbreviated as PMMA, is also known as Acrylic, Acrylic or Plexiglass. It has the advantages of high transparency, low price, and easy machining. It is a commonly used glass substitute material.

Polyethylene (PE) is the most common plastic in use today. It is a linear, man-made, addition, homo-polymer, primarily used for packaging.

PEEK is an engineering thermoplastic with excellent mechanical and thermal properties. Can be used to replace metal parts.

Bakelite is the first plastic made from synthetic components. It is a thermosetting phenol formaldehyde resin, formed from a condensation reaction of phenol with formaldehyde.

FR-4 glass epoxy is a popular and versatile high-pressure thermoset plastic laminate grade with good strength to weight ratios.

Rubber is a highly elastic polymer material with reversible deformation. It is elastic at room temperature and can produce greater deformation under a small external force. It can be restored to its original shape after the external force is removed. Rubber is a completely amorphous polymer, its glass transition temperature (T g) is low, and its molecular weight is large.

Carbon fiber plate is a board made of carbon fiber prepreg, which can replace the use of steel and aluminum.

UTR Imagine Black is a high-precision photosensitive resin material with excellent dimensional accuracy, smooth surface and excellent detail performance.

UTR-8100 is a colorless and transparent material with proven dimensional stability, suitable for general-use, detailed modeling and transparent visual simulation.

PWR Dark Black is a high-precision photosensitive resin material with excellent dimensional accuracy,

UTR-8100 is a colorless and transparent material with proven dimensional stability, suitable for general-use, detailed modeling and transparent visual simulation.

Somos® Ledo is a photosensitive resin material with tough texture and excellent waterproof performance developed by DSM, which can be used to make precision parts for prototyping and functional testing.

UTR 8220 is suitable for high-precision SLA 3D printing rapid prototyping system with 355nm light source.

DSM Taurus is the latest member of the Somos® high-toughness material series. Parts made of this material are easy to clean and process. For end users and component manufacturers, its ability to withstand higher heat distortion temperatures broadens the application range of light curing technology.

UTR 3000 is a high-precision photosensitive resin material with excellent dimensional accuracy, smooth surface and excellent detail performance.

UTR-Therm 1 photosensitive resin can withstand temperature up to 130℃, which can simulate the thermal performance of engineering plastics.

Somos® EvoLVe 128 is a low-viscosity photosensitive resin material developed by DSM.

UTR Flex is a high-precision photosensitive resin material with excellent flexible property, smooth surface and excellent detail performance.

Somos® PerFORM is a strong-performance, very hard, and high temperature-resistant composite material developed by DSM.

EvoDent Model V2.0 is a model material specially developed for dentistry.

A rugged ESD-safe material to improve your electronics manufacturing workflows.

Material type: Plastic, High strength, Impact resistant Nylon PA12 is the most common 3D printing material.

HP-PA has a variety of material properties that can meet the requirements of different scenarios.

Glass fiber nylon is PA12 nylon mixed with 35% glass fiber.

PLA (FDM) is used for low-cost, non-functional prototyping. Offers greater detail than ABS, but is more brittle. Unsuitable for high temperature applications.

ABS is a common thermoplastic with good mechanical properties and excellent impact strength, superior to PLA but with less defined details.

ABS-ESD7™ (acrylonitrile butadiene styrene-electrostatic dissipative) is an ABS thermoplastic with static dissipative properties for applications where a static charge can damage products,

PTEG is a very tough, durable and easy to use material.

TPU is called thermoplastic polyurethane elastomer rubber. It is a type of polymer material between rubber and plastic.

TPU has excellent characteristics of high tension, high tensile force, toughness and aging resistance.

PC offers accuracy, durability and stability, creating strong parts that withstand functional testing.

ASA is a production-grade thermoplastic that can be combined with FDM technology to achieve perfect performance.

PEEK is an engineering thermoplastic with excellent mechanical and thermal properties.

Aluminum AlSi10Mg is an aluminum alloy that combines good strength and thermal properties with low weight and flexible post-processing possibilities.

Stainless steel is resistant to weak corrosive media such as air, steam, and water, and chemically corrosive media such as acid, alkali, and salt.

Titanium TC4 has good comprehensive mechanical properties, high specific strength (strength-weight ratio), low thermal conductivity, and excellent corrosion resistance, toughness and weldability.

Mold steel can maintain a certain strength even at high temperatures. In the process of injection molding, it is traditionally used in the manufacture of tools and abrasives in the process of injection molding and die casting.

5052 is an aluminium alloy, primarily alloyed with magnesium and chromium.

6061 is an alloy that is suitable for hot forging. The billet is heated through an induction furnace and forged using a closed die process.

Stainless Type 304 is one of the most versatile and commonly used grades of stainless steel.

Stainless Type 316 is a standard molybdenum-bearing austenitic stainless steel grade.

Stainless steel 201, with certain acid and alkali resistance, high density, no bubbles, no pinholes, etc.

Type 301 is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel, which provides good strength and ductility when cold worked.

Mild steel 1018 is a widely used alloy with good machinability, weldability, toughness, strength, but it’s susceptible to corrosion on the surface.

Copper C110, being a tough pitch copper alloy, is not easily welded or brazed because it suffers from embrittlelment when heated in a reducing atmosphere.

C260 brass is the most ductile of the brasses and is used in greater quantity than any other copper-zinc alloy.

Copper alloy C101 is also known as HC or high conductivity copper.

Polymethyl methacrylate(PMMA), is a kind of high molecular polymer, also known as acrylic or plexiglass.

Carbon fiber plate is a board made of carbon fiber prepreg, which can replace the use of steel and aluminum.

Acrylonitrile Butadiene Styrene (ABS) is an opaque thermoplastic and amorphous polymer and is an ideal choice for applications that require an inexpensive, strong, stiff plastic that holds up well to external impacts.

POM is a plastic material featuring a very high tensile strength, with an outstanding resistance to creep, allowing it to bridge the gaps of material properties between most of the plastics and metals.

Nylon plastic (PA) is a synthetic thermoplastic polymer commonly used in injection molding applications.

Polycarbonates (PC) is an amorphous thermoplastic.

PC/ABS is a thermoplastic made of PC and ABS alloys, which combines the excellent properties of both materials.

PVC plastic is budget-friendly, resistant to environmental degradation, chemicals, and alkalis, and has excellent tensile strength and hardness.

Polyethylene is a thermoplastic polymer with a variable crystalline structure and a vast range of applications depending on the particular type.

Polypropylene(PP) injection molding material , is a thermoplastic addition polymer made by combining several propylene monomers.

Polystyrene (PS) plastic is a naturally transparent thermoplastic that is available as both a typical solid plastic as well in the form of a rigid foam material.

TPUs are tough, durable, easy to clean and well-suited to applications that demand the elasticity of rubber combined with high stability.

Acrylonitrile Butadiene Styrene (ABS) is an opaque thermoplastic and amorphous polymer and is an ideal choice for applications that require an inexpensive, strong, stiff plastic that holds up well to external impacts.

POM is a plastic material featuring a very high tensile strength, with an outstanding resistance to creep, allowing it to bridge the gaps of material properties between most of the plastics and metals.

Nylon is exceptionally strong, relatively resistant to abrasion and moisture absorptivity, long-lasting, resistant to chemicals, elastic, and easy to wash.

Polycarbonates (PC) is an amorphous thermoplastic.

PVC plastic is budget-friendly, resistant to environmental degradation, chemicals, and alkalis, and has excellent tensile strength and hardness.

Polyethylene is a thermoplastic polymer with a variable crystalline structure and a vast range of applications depending on the particular type.

Polypropylene(PP) injection molding material , is a thermoplastic addition polymer made by combining several propylene monomers.

Polystyrene (PS) plastic is a naturally transparent thermoplastic that is available as both a typical solid plastic as well in the form of a rigid foam material.

TPUs are tough, durable, easy to clean and well-suited to applications that demand the elasticity of rubber combined with high stability.

Silicone rubber is the material of choice in manufacturing rubber parts.