|
Autodesk Fusion 360Autodesk
|
3D-Printed Camera Mount
This 3D-printed magnetic camera mount can accommodate clamp arms with its central stud, or it can use a 1/4 - 20 nut and set screw to attach cameras, ball heads, or other equipment directly. 12 magnets are arranged in a circular pattern around the base, allowing it to clamp to shop equipment like vises, toolboxes, or milling machines.
The device was prototyped on an FDM machine, then made in clear resin by PCBWay, which looks phenomenal. Print files are available here if you would like to make your own. Disk magnets used are 12mm diameter x 3mm thick. As seen in the video, it will hold a camera steady, however, if it is offset too far the magnets can loose their grip.
3D-Printed Camera Mount
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Jeremy Cook
-
Light Up Business Card
PCB business card made with KiCad and other software. Coin cell battery lights up an 0805 SMD LED. P...
-
3D-Printed Camera Mount
This 3D-printed magnetic camera mount can accommodate clamp arms with its central stud, or it can us...
-
Sound Reactive Guitar Strap
This project uses the Circuit Playground Express (CPE) board by Adafruit and its built-in microphone...
-
Pico Touch 2 Raspberry Pi Pico Capacitive Helper
I made the Pico Touch 2 board shown in the video above after frustration with supplying my own THT r...
-
MIDI Kalimba Musical Instrument
After seeing a miniature Kalimba finger piano instrument, I realized I could convert it to a MIDI co...
-
LED-No-Solder
The LED-No-Solder PCB encapsulates a coin cell battery within the PCB using forks on either side for...
-
Tripple Face Clock With PCB Diffuser
In a previous writeup and video, I made a clock using a PCB as a diffuser. In this continuation of t...
-
Clock 742 PCB Diffuser Clock
The Clock 742 PCB clock uses a base PCB to connect 85 SK6812 addressable LEDs, and a Wemos S2 ESP826...
-
ICSP Pogo Pin Adapter
To make it easier to program chips like the ATtiny85 etc, I made this 6-pin pogo adapter with two id...
-
Miniature PCB Tester
I order and sell a number of EZ Fan 2 fan/load controller boards, and while the quality is excellent...
-
Raspberry Pi PCB Enclosure
PCBs are incredibly strong, and can be obtained for a very reasonable price. Based on published Rasp...
-
LED Cube Flower Arrangement With WLED
This project mounts 5 WS2812B LEDs on a cube made out of castellated PCBs. Five of these tiny PCBs a...
-
Mechanical Macro Keyboard Music Maker
Computer macro pads/stream decks/auxiliary keyboards normally control computer input functions with ...
-
JC Pro Macro Rotary Input
The JC pro Macro acts as a rotary input and auxiliary macro keyboard for your PC, powered by an Ardu...
-
Triple Zone PIR Workbench Lighting
After building a 7 ft x 3 1/2 foot workbench, I installed 12V overhead lighting, as outlined in this...
-
12V Overhead LED Lighting Control
After building a workbench with overhead storage, I installed 12V LED strip lights to illuminate my ...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
125 0 0 -
DIY Laser Power Meter with Arduino
174 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
164 0 2
