|
WS2812BWorldsemi
|
x 1 | |
|
Circuit Playground Express |
x 1 |
|
3D Printer (generic) |
Sound Reactive Guitar Strap
This project uses the Circuit Playground Express (CPE) board by Adafruit and its built-in microphone to sense sound. It reacts to sound/music intensity by lighting up a proportional number of LEDs, first onboard the CPE and then extending to attached addressable WS2812B devices.
The video above shows this implemented with PCBs recycled from a previous macro pad project and attached to a guitar strap. Each board is soldered together in order to pass signals/power/ground along to the next, allowing for a neat VU meter effect.
In the second "Ez-build" iteration of this project, I substituted in an addressable LED strip for the repurposed PCBs. In theory this device could be made without any soldering, just alligator clips, but you might want to solder things on anyway.
Sound Reactive Guitar Strap
- Comments(0)
- Likes(1)
- landonr Apr 17,2024
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Jeremy Cook
- Light Up Business Card PCB business card made with KiCad and other software. Coin cell battery lights up an 0805 SMD LED. P...
- 3D-Printed Camera Mount This 3D-printed magnetic camera mount can accommodate clamp arms with its central stud, or it can us...
- Sound Reactive Guitar Strap This project uses the Circuit Playground Express (CPE) board by Adafruit and its built-in microphone...
- Pico Touch 2 Raspberry Pi Pico Capacitive Helper I made the Pico Touch 2 board shown in the video above after frustration with supplying my own THT r...
- MIDI Kalimba Musical Instrument After seeing a miniature Kalimba finger piano instrument, I realized I could convert it to a MIDI co...
- LED-No-Solder The LED-No-Solder PCB encapsulates a coin cell battery within the PCB using forks on either side for...
- Tripple Face Clock With PCB Diffuser In a previous writeup and video, I made a clock using a PCB as a diffuser. In this continuation of t...
- Clock 742 PCB Diffuser Clock The Clock 742 PCB clock uses a base PCB to connect 85 SK6812 addressable LEDs, and a Wemos S2 ESP826...
- ICSP Pogo Pin Adapter To make it easier to program chips like the ATtiny85 etc, I made this 6-pin pogo adapter with two id...
- Miniature PCB Tester I order and sell a number of EZ Fan 2 fan/load controller boards, and while the quality is excellent...
- Raspberry Pi PCB Enclosure PCBs are incredibly strong, and can be obtained for a very reasonable price. Based on published Rasp...
- LED Cube Flower Arrangement With WLED This project mounts 5 WS2812B LEDs on a cube made out of castellated PCBs. Five of these tiny PCBs a...
- Mechanical Macro Keyboard Music Maker Computer macro pads/stream decks/auxiliary keyboards normally control computer input functions with ...
- JC Pro Macro Rotary Input The JC pro Macro acts as a rotary input and auxiliary macro keyboard for your PC, powered by an Ardu...
- Triple Zone PIR Workbench Lighting After building a 7 ft x 3 1/2 foot workbench, I installed 12V overhead lighting, as outlined in this...
- 12V Overhead LED Lighting Control After building a workbench with overhead storage, I installed 12V LED strip lights to illuminate my ...
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1