LDR CONTROLLED RELAY MODULE SMD
This is a simple LDR dark sensor project which is designed to turn ON a relay (when there is light) and turn it OFF(when there is no light). You can connect a domestic light bulb or mabye fan. u should only give a supply of (9v - 12v) .
you will need : LDR , NPN transistor (SMD) , 5V relay , 220Ω SMD RESISTOR (3) , 220K RESISTOR , SMD LED (2) .
INSTRUCTIONS ,
FIRST SOLDER THE COMPONENTS TO THE BOARD.
THEN SUPPLY POWER TO THE MODULE (9V - 12V).
PLACE THIS MODULE IN A PLACE WHERE DAYLIGHT AND DARKNESS STRIKES.
WHEN THE LIGHT STRIKES THE LDR, THE RELAY TURNS OFF AND WHEN THERE IS NO LIGHT, IT TURNES OFF.
pls like my project
LDR CONTROLLED RELAY MODULE SMD
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by umar_khalid
-
DIY ARDUINO UNO BOARD
this is a regular arduino board which all u need to do is solder the components and use a (FT232RL) ...
-
ARDUINO IR CONTROLLED RELAY (AC/DC)
This circuit needs maximum 5v - 7v if powered directly through DC power supply only. If ur supplyi...
-
LIGHT AND MOTION SENSITIVE LAMP CIRCUIT
This is a circuit which activates a RELAY when the envoiroment is dark and when there is a movement ...
-
DIY ARDUINO PRO MINI 2.0 (upgraded version)
This is a DIY arduino PRO mini which is like a regular arduino pro minni but it has less components ...
-
DIY SMD ARDUINO UNO
This is a regular arduino board which contains extra features such as an extra VCC/GND rail and it u...
-
DIY SMD ARDUINO UNO R3
This is a regular arduino board which contains extra features such as an extra VCC/GND rail and it u...
-
LDR CONTROLLED RELAY MODULE SMD
This is a simple LDR dark sensor project which is designed to turn ON a relay (when there is light) ...
-
DIY ARDUINO UNO SHEILD SMD
This is a simple arduino sheild that can run on it's own as an arduino uno once it's powered...
-
DIY arduino UNO sheild
This is a simple arduino sheild that can run on it's own as an arduino uno once it's powered...
-
DIY 4017 CLAP SWITCH CIRCUIT.
THIS IS A SIMPLE CLAP SWITCH CCIRCUIT THAT USES A 4017ic DECODER. WHEN U CLAP ONCE, IT TURNS THE R...
-
DIY DIGITAL CLOCK
THIS IS A SIMPLE DIGITAL CLOCK THAT WORKS WITH A 9V BATTERY AND CAN BE SET JUST THREE BUTTONS.IF U L...
-
DIY ARDUINO UNO R3 SMD
THIS WORKS AS A REGULAR ARDUINO UNO WITH AN SMD ATMEGA 328P.U JUST NEED TO SOLDER THE COMPONENTS AND...
-
arduino mega password security system shield
this is a sheild for an arduino mega. this security system can be accesed using RFID and IR and a ke...
-
LED CHASER
this is a simple circuit using an ic 4017 and an ic 555 timer . u can adjust the frequency using the...
-
LED CHASER
this is a simple circuit using an ic 4017 and an ic 555 timer . u can adjust the frequency using the...
-
DIY arduino uno r3
DIY arduino uno circuit.its used just like a regular arduino uno all u gotta do is get the component...
-
ARDUINO UNO R3
AN ARDUINO UNO R3 DIY PROJECTU WILL NEED: ATmega 328P, 22PF ceramic capacitors(3), a few female pin ...
-
2 WAY INTERCOM CIRCUIT_20181119155207
THIS IS A 2 WAY INTERCOM CIRCUIT, IT WORKS LIKE A WALKIE TALKIE BUTWITH WIRES
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
