|
KiCADKicad
|
PlayStation PU-22 8MB RAM daughterboard
This daughterboard replaces the RAM IC on PU-22 PlayStation motherboards, allowing the user to expand the RAM of the console from 2MB to 8MB, same as a development kit.
The modification requires this board printed as a flexible PCB, assembled, the original RAM removed and replaced with the board, plus two additional addresses taken from the CPU via jumper wire.
I repeat, this board must be printed as a flexible PCB!!!
You can find the original repository here: https://gitea.hkzlab.info/tabaglio/PU22_ram_mod
PlayStation PU-22 8MB RAM daughterboard
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Fabio Battaglia
- dupico - EPROM_01 POD The EPROM_01 POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support the most common 24/2...
- PlayStation PU-22 8MB RAM daughterboard This daughterboard replaces the RAM IC on PU-22 PlayStation motherboards, allowing the user to expan...
- MSP-MDC Redux This board is a reverse-engineered recreation of the CPU/Security module for the Wink arcade game (1...
- dupico - PAL POD The PAL POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support 20 and 24 pin PAL (and pi...
- DuPAL V3 - dupico The DuPAL V3, AKA "dupico" board is a simple circuit that mounts a Raspberry Pico (RP2040), 74HC595 ...
- SCART SyncSplitter This card takes an RGB + Composite signal from a SCART connector and outputs the same RGB signal + s...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
156 1 1 -
-