Fabio Battaglia
ITALY • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
DuPAL V3 - dupico
The DuPAL V3, AKA "dupico" board is a simple circuit that mounts a Raspberry Pico (RP2040), 74HC595 SIPO registers, 74HCT166 PISO registers, and some glue logic and passives.
The board is designed to help me analyze and dump various types of PLDs and memories.
Software can be found at https://github.com/DuPAL-PAL-DUmper
Aug 12,2024
380 views
end-flag
DuPAL V3 - dupico
New board for the DuPAL PLD Reverse Engineering / Analysis project, based on the Raspberry Pico
380
2
0
Published: Aug 12,2024
Download Gerber file 9
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
Log in to post comments.
Upload photo
0 / 10000
More by Fabio Battaglia
-
8x8 LED MATRIX EDUBOARD
This board is an educational implementation of an 8x8 multiplexed led matrix. The rows/columns bits ...
-
dupico - EPROM_01 POD
The EPROM_01 POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support the most common 24/2...
-
MSP-MDC Redux
This board is a reverse-engineered recreation of the CPU/Security module for the Wink arcade game (1...
-
dupico - PAL POD
The PAL POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support 20 and 24 pin PAL (and pi...
-
DuPAL V3 - dupico
The DuPAL V3, AKA "dupico" board is a simple circuit that mounts a Raspberry Pico (RP2040), 74HC595 ...
-
SCART SyncSplitter
This card takes an RGB + Composite signal from a SCART connector and outputs the same RGB signal + s...
-
PlayStation PU-22 8MB RAM daughterboard
This daughterboard replaces the RAM IC on PU-22 PlayStation motherboards, allowing the user to expan...
-
The Padapter
This board converts a SEGA MegaDrive/Genesis 3-button gamepad for C64 (and similar)/Amiga use.All bu...
-
Commodore C128 (310381 R7) SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C128 with a 310381R7 motherboard.Y...
-
Angled 44 pin 2.0mm pitch adapter
I was in need of fitting a uSD to IDE adapter inside a cramped case, the connector for it was horizo...
-
Lava RSC Lite Famiclone Upgrade board
The Lava RSC is a family of very nice Famiclones that use ICs found in the original Famicom, complem...
-
A500 IDE LED mod board
This board reproduces the same circuit that the A500 uses to flash the "DRIVE" LED when the /MTR0 si...
-
C64 250407 SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C64 with a 250407 motherboard. I w...
-
8x8 LED MATRIX EDUBOARD
This board is an educational implementation of an 8x8 multiplexed led matrix. The rows/columns bits ...
-
dupico - EPROM_01 POD
The EPROM_01 POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support the most common 24/2...
-
MSP-MDC Redux
This board is a reverse-engineered recreation of the CPU/Security module for the Wink arcade game (1...
-
dupico - PAL POD
The PAL POD is an adapter for the DuPAL V3 (AKA "dupico") meant to support 20 and 24 pin PAL (and pi...
-
DuPAL V3 - dupico
The DuPAL V3, AKA "dupico" board is a simple circuit that mounts a Raspberry Pico (RP2040), 74HC595 ...
-
SCART SyncSplitter
This card takes an RGB + Composite signal from a SCART connector and outputs the same RGB signal + s...
-
PlayStation PU-22 8MB RAM daughterboard
This daughterboard replaces the RAM IC on PU-22 PlayStation motherboards, allowing the user to expan...
-
The Padapter
This board converts a SEGA MegaDrive/Genesis 3-button gamepad for C64 (and similar)/Amiga use.All bu...
-
Commodore C128 (310381 R7) SRAM Adapter
This board implements a static RAM replacement for the DRAMs on a C128 with a 310381R7 motherboard.Y...
-
Angled 44 pin 2.0mm pitch adapter
I was in need of fitting a uSD to IDE adapter inside a cramped case, the connector for it was horizo...
-
Lava RSC Lite Famiclone Upgrade board
The Lava RSC is a family of very nice Famiclones that use ICs found in the original Famicom, complem...
-
A500 IDE LED mod board
This board reproduces the same circuit that the A500 uses to flash the "DRIVE" LED when the /MTR0 si...
You may also like
-
-
-
Modifying a Hotplate to a Reflow Solder Station
848 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
444 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1086 4 2 -
How to measure weight with Load Cell and HX711
689 0 3
