|
KiCADKicad
|
|
|
arduino IDEArduino
|
|
|
STM32CubeIDE |
STM32F070F6P6 miniature USB microcontroller board
A small but powerful Arduino-compatible STM32 board.
I designed this board because I was curious if it could fulfil the requirements for one of my upcoming projects. Unfortunately, no, but I can still use this board for many other things.
Thanks to its built-in native USB, it is very convenient to connect it to the computer and communicate with it, or even programming it through the USB connection.
It has all the basic peripherals, so all the good sensors and modules can be connected to it.
The board is supported by the STM32duino framework, so one can develop code for it using the Arduino IDE. There's no need to lear the ST's HAL framework (yet :) ).
However, it can happen that this specific MCU cannot be found on the list of MCUs in the Arduino IDE, even after installing all the relevant files.
Both in the video and on my website, I shared a tutorial on how to add a new variant to the Arduino IDE.
STM32F070F6P6 miniature USB microcontroller board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(2)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
8design
-
9usability
-
7creativity
-
10content
More by Curious Scientist
- USB PD Breadboard Power Supply In this article, I show you my new creation. It is a USB PD decoy-based breadboard power supply. All...
- ADS1256 - RP2040 Custom DAQ Front Panel with GPIO This is just a simple PCB panel that belongs to my other project which is a high-performance DAQ.A r...
- ADS1256 - RP2040 Custom DAQ Front Panel without GPIO This is just a simple PCB panel that belongs to my other project which is a high-performance DAQ.A r...
- 10th Anniversary Badge I designed this small badge for PCBWay's 10th anniversary.I tried to make a deeper meaning to the bo...
- ADS1256 - Atmega32u4 Custom DAQ board IntroductionIn this project, I show you two things. One is a new version (v1.2) of my custom DAQ bas...
- Debounced rotary encoder module In this project, I show you my approach to making a rotary encoder module.One can buy different rota...
- Custom ADS1256 board with ATmega32U4 I created my own ADS1256 PCB after working with this AD converter for several years. I wanted to bui...
- ADS1256 - RP2040 Custom DAQ Rear Panel This is just a simple PCB panel that belongs to my other project which is a high-performance DAQ.A r...
- ADS1256 - RP2040 Custom DAQ with GPIOs This is my (hopefully) last iteration of the ADS1256-based DAQ board. I replaced the ATmega32U4 micr...
- High-performance 3-axis stepper motor control panel In this project, I show you my new development which is a high-performance 3-axis stepper motor cont...
- STM32F070F6P6 miniature USB microcontroller board A small but powerful Arduino-compatible STM32 board.I designed this board because I was curious if i...
- Stepper motor developing platform IntroductionIn this project, I show you my newest device which is a stepper motor developing platfor...
- Custom-made self-contained DC power meter This project realizes a tiny "self-sufficient" power meter that can be inserted into any DC power li...
- 10-channel NTC thermistor-based temperature logger This project is designed to be a 10-channel temperature logger based on 10k NTC thermistors.I design...
- Educational board for strain gauges, Wheatstone bridges and op-amps I show you a little device that I built so I can explain more things related to strain gauges, Wheat...
- Focus Stacking Mechanism In my previous project, I shared the PCB for this mechanism. In this project, I share the parts of t...
- Focus Stacking Circuit For Macro Photography This circuit is mainly designed to serve as a tool for shooting pictures for focus stacking macro ph...
- Self-contained PCB weighing scale Note! Please follow the attached interactive BOM. It will help you to find the correct components an...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-