Romakin Michael
RUSSIAN FEDERATION, THE • + Follow
Description
Temperature control board
### DESCRIPTION
This device is designed то replacing the original control board in a low cost yogurt maker machine on a board with advanced functions (DS18B20 sensor, PID-controled temperature, decremental timer (max 24h) with the ability to set the time with an accuracy of 1min, the ability to set the temperature from 24C to 42C with an accuracy of 0.5C, the information is displayed on two-digit indicator in the form of a running line, the ability to turn off the heat and use the device as a timer).
Code
https://drive.google.com/open?id=1ksmFKyjo0YVBTL4Obc1TBIOA9y5ZolP2
Oct 03,2018
1,882 views
Temperature control board
1 Layers PCB 58 x 76 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
1882
1
0
2.75 (1)
Published: Oct 03,2018
Download Gerber file 19
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
VOTING
1 votes
- 1 USER VOTES
2.75
- YOUR VOTE 0.00 0.00
-
2design
-
3usability
-
3creativity
-
3content
2.75
More by Romakin Michael
-
220V 3-step relay voltage regulator
220V 1.5kW 3-step relay voltage regulator without breaking the circuit at the time of switching step...
-
Adapter for AVR Fuse Bit Doctor
Adapter for AVR Fuse Bit Doctor https://www.pcbway.com/project/shareproject/AVR_Fuse_Bit_Doctor_1.ht...
-
PG-872 Dual Channel Square Wave Generator
This PCB for a PG-872 Dual Channel Square Wave Generator (generator designed by Leonid Ivanovich Rid...
-
AVR Fuse Bit Doctor
This version of the fuse bit doctor does not have sockets on the board. All microcontrollers are con...
-
Simple DDS generator
This is a PCB for simple DDS generator, wich based on development the author under the nickname Inte...
-
USB 2.0 microSD/TF card reader
USB 2.0 microSD/TF card reader. Based on GL827L SD/MMC/MS Flash Card Reader single chip. All SMD com...
-
EMMC test board adapter for Z3X box (first revision)
eMMC test board adapter was developed specifically for owners of the Z3X box (for the first revision...
-
PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips.
PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips.
-
DIY clone Arduino Uno PCB
A redesigned Arduino UNO clone PCB takes into consideration using some alternative components like (...
-
p-n junction tester
PCB for p-n junction tester. More information here https://www.radiokot.ru/konkursCatDay2017/48/
-
SG-642 sine wave generator
This PCB for a sine wave generator SG-642 (generator designed by Leonid Ivanovich Ridiko). The board...
-
Digital oscilloscope probe DSS-31
______________________________________________Purpose:The DSS-31 oscilloscope is a standalone portab...
-
USB 2.0 microSD/TF card reader with micro USB B 5-pin
USB 2.0 microSD/TF card reader with micro USB B 5-pin connector. Based on GL827L SD/MMC/MS Flash Car...
-
Temperature control board
### DESCRIPTIONThis device is designed то replacing the original control board in a low cost yogurt ...
You may also like
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
74 0 0 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
122 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
418 0 1 -
Custom Mechanic Keyboard - STM32
246 0 3
