There are three PCB's the comprise the Tri-Logic Phantom 1541 Disk Drive Enhancement system. This board is the userport parallel cable link board that connects the Phantom Drive Board to your Commodore 64. This is a required component.

Background on the Phantom:

For the first time anywhere since 1986, now you can own your very own "Phantom". The Phantom is a 1541/C64 drive enhancement that was available in the UK in the mid 80's. It was only available for a short time, and has long since thought to have been lost forever.

Installation of this board in the drive must follow very specific steps to ensure proper functionality. The installation video can be found here: << 8-Bit Resurgence Phantom Installation Video >>

This is an accurate reproduction of the original that has been extensively tested. What you do need to provide besides the Phantom (three boards, fully assembled) is a Commodore 64 computer, 1541 long-board disk drive and one additional 6522 IC. These are very commonly available chips, and are in most enthusiasts parts collection.

The Phantom is further documented on it's own << GitHub >> entry. Additionally, you can find more information on the Phantom here << An Original Tri-Logic Phantom >> and a Phantom comparative speed test here << Fastest Disk Drive in the World >>

If you're going to order this Phantom board, then check out my other boards, as you'll need the main drive board and the kernal board as well.