PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Help Center
Sending a message
9:00 - 23:00, Mon.- Sun. (GMT+8)
Service hotlines
+86 571 8531 7532

9:00 - 18:00, Mon.- Fri. (GMT+8)

9:00 - 12:00, Sat. (GMT+8)

(Except Chinese public holidays)

How can we help?

Notes for Gerber files Generated from Eagle 9.20

Summary:       Avoid mistakes when generating Gerber file from Eagle 9.20

Note: For eagle the latest version 9.6.2, please click How to Generate Gerber and Drill Files From Eagle 9.6.2

Several days ago, Eagle released the lastest version 9.20, which still provide the convenient button for generating Gerber files. But what followed was some file problems.

1.When opening Eagle.brd file and clicking the "CAM processor", you need be aware of the option of soldermask layers. 

cam.png

Please uncheck the box of "Nagative Polarity" which  is checked by default, shown as below screenshot:

soldermask.png

2. To ensure the correctness and accuracy of the board outline in the profile layer, please check and add BOTH the #Dimension and #Milling into the Profile layer, shown as below:

Profile.png

Then you can choose the Gerber RS-274X or RS -274X with comments and click "Process Job" to get the Gerber files.

3. For multi-layer (more than 4 layers) PCB, if there are buried/blind vias in your boards,  then you need to generate all the drill files by right clicking "Drill -->Excellon" and choose "Geberate Excellon outouts based on PCB stackup"

1535144745404.png

Then you can "Process Job" and get all the drill files needed.

PCBWAY CAM.png

Leave a comment below if you have any questions.


Last updated on 17/07/2024
Comments (2)
This message here is only a suggestion supplement to the above content, and does not for trading operations such as orders. If you have any urgent questions or order issues, please contact your sales rep.
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000