Product Description
4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi, I2C/SMBus
Introduction:
Current/Power Monitor HAT is a current and power monitor developed for Raspberry Pi. It has 4 channels and can monitor the current, voltage, power and voltage across the sampling resistor through I2C/SMBus interface.
Features:
- Based on Raspberry Pi 40pin GPIO interface, it is suitable for Raspberry Pi series motherboards.
- Supports 4-channel detection and can communicate through I2C/SMBus interface.
- On-board 0.1 ohm 1% sampling resistor can measure bidirectional current, and the measured current is as high as 3.2A
- Built-in 12-bit ADC, which can be used for multiple consecutive conversions, and the measuring voltage range supports 0~26V
- The output measured power can be directly calculated by additional multiplication register.
- The I2C control interface is led out to facilitate access to other main control boards.
- Provide complete supporting information manuals (sample programs such as Raspberry/Arduino/STM32)
Parameter:
- Operating voltage: 3.3V/5V
- Interface: I2C/SMBus
- Sampling resistance: 0.1 ohm 1%
- Voltage range: 0~26V
- Current range: ±3.2A
- Resolution: 0.8mA (range ±3.2A) or 0.1mA (range ±400mA)
- Product size: 65mm × 30mm
- Diameter of through hole: 3.0mm
Standard Raspberry Pi 40PIN GPIO Header
* for reference only, Raspberry Pi boards are NOT included.
Outline Dimensions
Resources & Services
Wiki:https://www.waveshare.com/wiki/Current/Power_Monitor_HAT
Shipping list:
- Current/Power Monitor HAT x1
- 2x20PIN female pinheader x1
- Screws pack x1
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now
-
-8%RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now
-
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now
-
-
-
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping$17.00 or 1700 BeansRedeem Now